Highly sensitive SAW resonators

16 September 2009 Telecoms, Datacoms, Wireless, IoT

The new range of SAW resonators from Epcos features greatly reduced tolerance around the centre frequency. Compared to predecessor types, it was narrowed down by 50% and is now only ±25 kHz at 433,92 MHz. The components are mounted on a quartz substrate in hermetically sealed packages and have a footprint of 3 x 3 mm. The permissible operating temperature lies between -45°C and +125°C.

The first types of the R990 (433,92 MHz) and R991 (315 MHz) series are suitable for high-precision wireless transmitters operating in the ISM bands, including automotive electronic applications such as remote keyless entry and tyre pressure monitoring systems. This allows transmitters to be configured with very narrow bands, which both increases the sensitivity of the receivers and reduces their susceptibility to interference. It also enables greater transmission ranges. The resonators satisfy the requirements of AEC-Q200.

Further reading:

5G transparent antenna
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions recently announced the launch of its 5G transparent antenna, the YFCX001WWAH, an innovative solution designed to improve connectivity while maintaining seamless device design.

Read more...

---

GNSS chipset for wearables
RF Design Telecoms, Datacoms, Wireless, IoT
The UBX-M10150-CC from u-blox is a GNSS chip that supports GPS, QZSS/SBAS, Galileo, and BeiDou constellations, and is designed for integration into wearable applications.

Read more...

---

X-band radar
RF Design Editor's Choice Telecoms, Datacoms, Wireless, IoT
X-band radar systems, particularly those leveraging beamforming ICs (BFICs), advanced gallium nitride (GaN) and gallium arsenide (GaAs) components, are leading the way in providing the high-performance radar capabilities required for modern defence and surveillance.

Read more...

---

Reference board for cardio monitoring
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STDES-ESP01 reference board from STMicroelectronics demonstrates the capability of the ST1VAFE6AX and ST1VAFE3BX biosensors to detect ECG and SCG signals.

Read more...

---

LTE Cat 1 bis communication
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The EG810M series is a series of LTE Cat 1 bis wireless communication modules specially designed by Quectel for M2M and IoT applications.

Read more...

---

Quad-channel 16-bit converter
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The ARF0468 from Advance RF is a quad-channel mixed-signal processing chip, with each channel comprising three major functional modules: ADC/DDC/DDS.

Read more...

---

Tactical navigation system
Etion Create Telecoms, Datacoms, Wireless, IoT
Etion Create’s CheetahNAV Compact is a versatile tactical navigation system designed for security services, emergency services, and light all-terrain vehicles (ATVs) using offline navigation maps.

Read more...

---

Smart module for multi-media devices
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Powered by a Qualcomm processor, Quectel’s new SC200V is designed to deliver exceptional performance across system capabilities, multimedia functions, and network connectivity.

Read more...

---

Remote provisioning firmware added to SIMCom modules
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently announced that its range of Cat 1 bis IoT modules are now being prepared with the firmware necessary to support SGP.32 functionality.

Read more...

---

GNSS antenna redefining what’s possible
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox has achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.

Read more...

---