Cast resin transformers

3 February 2010 Power Electronics / Power Management

Legrand has released new cast resin transformers manufactured by its subsidiary, EdM, for the distribution of electrical power, energy co-generation, rectification and traction.

EdM units meet stringent international quality and safety specifications for installation in any environment, including severe conditions. Standard distribution transformers have rated power between 100 and 3150 kVA, primary rated voltage up to 36 kV and secondary rated voltage up to 433 V. Special transformers have rated power up to 20 000 kVA and primary rated voltage up to 36 kV.

Unlike oil transformers, these cast resin units can be installed inside buildings and do not require additional building structures. Since no cooling fluids are necessary, maintenance costs are also minimised. Rubber inserts alleviate the transmission of vibrations between core and windings, also reducing operating noise levels and absorbing thermal expansion of components. Sockets on the MV side adapt the primary voltage to the mains, which can be set with the transformer switched off. Class F insulating material allows for a temperature rise of 100°C and the epoxy resin insulation means low maintenance. The carriage of these units, which allow safe movement, is pre-equipped for the mounting of IP reinforced enclosures.

Accessories include thermal sensors or thermistors, electronic units for temperature control and forced ventilation systems to increase transformer power in temporary overloads or at high environmental temperatures. Legrand can also supply MV terminations for plug-in connections, surge arrester kits and anti-vibrating supports. Protective enclosures, available with different degrees of protection – IP21, IP31 and IP23 – protect transformers from external environmental impacts and people from the risk of direct contact.

EdM transformers are enhanced by the Zucchini busbar trunking system which provides synergy for a direct connection. These busbars are available in aluminium or copper.

For more information contact Legrand, +27 (0)11 444 7971, [email protected], www.legrand.co.za

Further reading:

Rugged railway-grade DC-DC power modules
iCorp Technologies Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.

Read more...

---

Four-quadrant regenerative grid simulator
Conical Technologies Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.

Read more...

---

90 W PSU with 150% boost capability
Brabek Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.

Read more...

---

Standalone USB PD controller
Future Electronics Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.

Read more...

---

Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...

---

MIL-Spec DC-DC power converters
Vepac Electronics Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.

Read more...

---

Compact power MOSFET for high current switching
Future Electronics Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.

Read more...

---

DC link capacitors for demanding applications
RS South Africa Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.

Read more...

---

N-channel power MOSFETs
TRX Electronics Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.

Read more...

---

Smart power protection, simplified
TRX Electronics Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.

Read more...

---