Computer/Embedded Technology


RISC processor offers 1545 MIPS/watt

23 May 2001 Computer/Embedded Technology

Showcasing an innovative new 64 bit RISC architecture, NEC's newest member of its Vr Series product line, the Vr4131 microprocessor, is aimed at network appliances, storage systems, and portable applications. Capable of 1545 MIPS per watt, one of the highest performance/lowest power ratios, the 200 MHz 64 bit MIPS RISC processor leverages the company's dual-issue superscalar architecture and delivers 340 Dhrystone MIPS at 200 MHz. This level of performance, combined with the processor's ultra-low 220 mW power consumption at 200 MHz with a 1,5 V power supply, makes the Vr4131 ideal for emerging multi-CPU applications, as well as portable applications.

Key to the high performance according to NEC, is the microprocessor's dual-issue super-scalar architecture, which includes two symmetrical pipeline control and execution units capable of executing two integer instructions. This maximises the instruction issue rate and is capable of executing an average of 1,4 times faster than single pipeline architectures. The processor includes two-way set associative 16 KB on-chip instruction and 16 KB data cache memory, a 100 MHz SDRAM controller and PCI interface.

Impact Memec

(011) 897 8600





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
QuecPi smart development board
iCorp Technologies Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.

Read more...
Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.

Read more...
Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.

Read more...
Computing in industrial environments
Vepac Electronics Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.

Read more...
DDR5 DRAM series
Vepac Electronics Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.

Read more...
Generate waveforms at 10 GS/s
Vepac Electronics Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved