The Ember EM35x network co-processor (NCP) add-on kit enables network co-processor development with an existing EM35x development kit, allowing designers to take advantage of the low power consumption, radio performance and CPU performance of the EM300 series chips in a network co-processor configuration. The add-on kit consists of the EM35x NCP breakout board, EM35x module, STM32 host module and battery pack.
The breakout board contains the hardware peripherals for the development and deployment of a low-data-rate, low-power ZigBee application on a host microcontroller interfacing via EZSP protocol to the EM300 series NCPs. The board supports SPI and UART EZSP interfaces for development flexibility. Modules separately contain the EM35x NCP and the host microcontroller to allow for freedom during application development. The modules are connected to the breakout board through robust connectors.
The NCP breakout board’s hardware stimuli include a temperature sensor, two buttons, a piezo buzzer, two LEDs and a 40,6 x 45,7 mm through-hole prototyping area. The board also contains a USB transceiver with USB connector, an RS232 transceiver with DB-9 connector, data emulation interface (DEI), InSight port (ISP) programming interface and regulated power planes. It includes an optional host interface to 2 MB external DataFlash in support of the ZigBee OTA Profile for over-the-air (OTA) application bootloader purposes.
Smart farming with LoRaWAN Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Real-time visibility is transforming modern agriculture, and Otto Wireless Solutions, together with Dragino, deliver this capability through a comprehensive suite of long-range IoT sensors and gateways designed for smart farming.
Read more...RTK-enhanced GNSS and INS solution Dizzy Enterprises
Telecoms, Datacoms, Wireless, IoT
This latest XSENS MTi-8 Click provides high-accuracy positioning (RTK-supported) and orientation tracking in demanding outdoor embedded applications.
Read more...High-performance double balanced RF mixer RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The AM5008 from Mercury Systems is a high-performance, double-balanced MMIC mixer designed for wideband applications spanning 2 GHz to 24 GHz.
Read more...Compact NFC antennas enable easy integration
Telecoms, Datacoms, Wireless, IoT
Leankon has expanded its 13,56 MHz NFC antenna portfolio with a comprehensive suite of nine off the shelf products designed for next generation IoT applications.
Read more...Ultra-low jitter clocks Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Skyworks has introduced a new family of ultra-low jitter programmable clocks designed to meet the increasing demands of next-gen connectivity.
Read more...Efficient Bluetooth SoC Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The EFR32BG29 wireless SoC from Silicon Labs is a highly efficient, high memory, low-power, and ultra compact SoC designed for secure and high-performance wireless networking for IoT devices.
Read more...Minimal size, maximum flexibility Würth Elektronik eiSos
Telecoms, Datacoms, Wireless, IoT
Würth Elektronik has introduced two highly compact radio modules that give developers maximum freedom in designing proprietary wireless solutions that go beyond standard protocols.
Read more...HackRF Pro advances Open SDR performance IOT Electronics
Telecoms, Datacoms, Wireless, IoT
Designed for engineers, researchers, and radio enthusiasts alike, the HackRF Pro can transmit and receive signals across a wide frequency range of 100 kHz to 6 GHz, making it a versatile tool for testing and developing modern and emerging radio technologies.
Read more...Deterministic high-speed Ethernet
Telecoms, Datacoms, Wireless, IoT
The Fraunhofer Institute for Photonic Microsystems IPMS has developed a new 10G TSN endpoint IP Core, enabling deterministic real-time communication at data rates of up to 10 Gbit/s.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version