Computer/Embedded Technology


Mini-ITX motherboard

16 March 2011 Computer/Embedded Technology

New from Advantech is the AIMB-280, an industrial grade Mini-ITX motherboard supporting the latest Intel Core i7/i5/i3/Pentium processors with LGA 1156 sockets. The Intel 45nm Core i7 and Core i5 700 series processors are quad-core CPUs with integrated memory controllers. The 32 nm Intel Core i5 600 and Core i3 series processors are dual-core with integrated graphics and memory controllers, and Intel HD Graphics with DX10 support.

The board is capable of SATA RAID 0, 1, 5 and 10. It comes with one PCIe x16 expansion slot, two serial ports, eight USB 2.0 ports and four Serial ATA II 300 MBps connectors. The AIMB-280 also comes with software RAID 0, 1, 5 and 10 support, and dual PCI Express-based Intel 82578DM and 82583V Gigabit Ethernet ports delivering up to 1000 Mbps of bandwidth. With the graphics engine integrated into the processor, these two-chip solutions provide enhanced graphics performance compared with previous Intel platforms.

Advantech provides drivers and APIs for different operating systems including GPIO, SMBus, watchdog timer, hardware monitor, panel backlight on/off and brightness control. Supported operating systems include Windows 7, Windows XP, Windows XP Embedded, Windows CE and Linux.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
QuecPi smart development board
iCorp Technologies Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.

Read more...
Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.

Read more...
Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.

Read more...
Computing in industrial environments
Vepac Electronics Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.

Read more...
DDR5 DRAM series
Vepac Electronics Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.

Read more...
Generate waveforms at 10 GS/s
Vepac Electronics Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved