Computer/Embedded Technology


PCI DAQ card

13 April 2011 Computer/Embedded Technology

The PCI-1800LU/1800HU is a high-performance, multifunction PCI card providing high-speed analog I/O and digital I/O functions.

Developed by ICP DAS, the board has a universal PCI interface supporting both 3,3 V and 5 V PCI bus, and it features a continuous, 330 KSps or 44 KSps, 12-bit resolution A/D converter, 1 kilosample hardware FIFO, a MagicScan controller (for multichannel scan), 2-channel 12-bit D/A converter, 16-channel digital input and 16-channel digital output. The card provides either 16-channel single-ended or 8-channel differential analog inputs which are jumper selectable, and a programmable high-speed PGA is equipped for gain controls (0,5/1/2/4/8 for low gain, 0,5/1/5/10/50/100/500/ 1000 for high gain).

The PCI-1800LU/HU also adds a card ID switch and pull-high/low resisters for DI onboard. Users can set card ID on a board and recognise the board by the ID via software when using two or more cards in one computer. The pull-high/pull-low resisters are used to specify the DI status; when the DI channels are unconnected, the DI status will remain in predefined status without being left floating.

The associated software supports various operating systems such as Linux, DOS, Windows 98, Windows 2000, Windows NT and Windows XP/2003/Vista/2008/7 32/64-bit. It also provides the DLL, ActiveX control and various language sample programs for Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to aid application development.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

From idea to intelligent product
TRX Electronics Computer/Embedded Technology
Mouser Electronics has announced a new eBook in collaboration with Arduino – From Blink to Think: How Arduino UNO Q Helps Designers Go from Idea to Intelligent Product.

Read more...
Think Diamond Long-life COM-based SBCs
Electronic Products Design Computer/Embedded Technology
A COM-based SBC combines the flexibility of a standard computer-on-module (COM) with a baseboard offering additional I/O, expansion sockets, power supplies, and I/O connectors. The result is a highly flexible, highly expandable, feature-dense product that can be adapted to the widest range of applications, offering maximum product lifetime.

Read more...
Next-Gen Min-ITX motherboard
Vepac Electronics Computer/Embedded Technology
Adding to AAEON’s extensive industrial motherboard portfolio, the Next-Gen MIX-Q870A1 is the company’s most advanced Mini-ITX board to date.

Read more...
Rev 2.0 PolarFire FPGA ethernet sensor bridge
Altron Arrow Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.

Read more...
Rugged combo antennas cut multi-network installations down to one
iCorp Technologies Computer/Embedded Technology
Quectel Wireless Solutions has expanded its antenna portfolio with four rugged multi-network combo antennas.

Read more...
Intelligent video processing
Rugged Interconnect Technologies Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.

Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.

Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.

Read more...
Arrival of the Epic-PTH9
Vepac Electronics Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.

Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved