mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

DC link capacitors
11 May 2011, Passive Components

Spectrum has developed a new range of high-reliability DC link capacitors for power inverter applications which require long life expectancy under harsh operating conditions, such as those found in wind and photovoltaic installations.

The products feature a segmented, self-healing metallised polypropylene construction for life expectancy exceeding 100 000 hours. Their high capacitance density and ripple current capabilities make them suitable as replacements for electrolytic capacitors. Capacitance ranges from 160 μF to 680 μF standard (others available upon request) with standard tolerance of ±10% at rated voltages between 900 and 1300 V d.c. The capacitors are tested to the environmental specifications of MIL-STD-202 and can endure operating temperatures in the range of -55°C to +85°C standard (+105°C upon special request).


Credit(s)
Supplied By: Electronic Industry Supplies
Tel: +27 11 726 6758
Fax: 086 510 7402
Email: hreispty@iafrica.com
www: www.eispty.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • PCB cleaning diagnostic system
    26 June 2019, Electronic Industry Supplies, Test & Measurement
    The Verinas system from PBT Works is a dedicated piece of AOI (automatic optical inspection) equipment for evaluating remaining flux residues on PBT glass test boards. The system can be used by electronics ...
  • Consumer grade power inductors
    26 June 2019, Electrocomp, Passive Components
    Bourns is introducing the Model SRP7028C, SRP1038C and SRP1770C high-current shielded power inductor series, designed to meet today’s high current density requirements in various types of consumer electronics ...
  • High-current shielded power inductors
    26 June 2019, Electrocomp, Passive Components
    The inductive components product line at Bourns has created the Model SRP5050FA and Model SRP7030CA high-current shielded power inductor series, designed to meet today’s high current density requirements ...
  • Shielded power inductors
    26 June 2019, RF Design, Passive Components
    High-temperature power inductors from Coilcraft are available with inductance values from 22 to 47 µH, current ratings up to 5,5 A, and low direct current resistance (DCR). The inductors in the XAL7050 ...
  • Automotive qualified chip resistors
    29 May 2019, Electrocomp, Passive Components
    Bourns announced the introduction of its new sulphur-resistant, AEC-Q200 compliant thick film chip resistor series. The new Model CRxxxxA-AS series is available in eight different footprints from small ...
  • Inductor learning kit
    30 April 2019, Würth Elektronik eiSos, Passive Components
    Co-developed by Würth Elektronik eiSos and Texas Instruments, the TI-PMLK Buck Würth Elektronik Edition is a learning kit to autonomously study the impact of magnetics in a power supply using a buck board ...
  • Vacuum test fixture
    30 April 2019, Electronic Industry Supplies, Test & Measurement
    With its newly designed vacuum test fixtures, Ingun has simplified mass testing of a small number of PCB (printed circuit board) versions. The vacuum test fixture combines intuitive handling and a robust, ...
  • Rugged AC filter capacitors
    30 April 2019, Electrocomp, Passive Components
    TDK has introduced a new series of AC filter capacitors that are UL 810 approved at the component level and carry the CE mark. The capacitors of the B32354S3* series are designed for a rated voltage of ...
  • Solder dross recovery system
    27 March 2019, Electronic Industry Supplies, Manufacturing / Production Technology, Hardware & Services
    Stannol’s Solder Saver is a mechanical device to reduce dross, which occurs as an unavoidable side effect in wave soldering systems. According to its manufacturer, solder consumption can be reduced by ...
  • High-voltage double chokes
    27 March 2019, Würth Elektronik eiSos, Passive Components
    With its WE-TDC HV, Würth Elektronik eiSos has introduced a further double choke optimised for SMT assembly. The magnetically shielded 1:1 transformer, with an isolation voltage of 2 000 V, boasts very ...
  • Moulded power inductors
    27 March 2019, RF Design, Passive Components
    Coilcraft introduced its new XGL4020 series of high-performance moulded power inductors at this year’s Applied Power Electronics Conference (APEC) in California, USA. They feature very low DC and AC losses ...
  • RM6 and RM10 transformers
    27 March 2019, Würth Elektronik eiSos, Passive Components
    The new MID-OLRM extended rail RM6 and RM10 transformer series for offline applications is now available from Würth Elektronik. For the past 30 years, the RM packages have required flying leads to meet ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.