Linear Technology has introduced the LTC4270/ LTC4271 isolated 12-port power source equipment (PSE) controller chipset designed for use in IEEE 802.3at (PoE+) Type 1 and Type 2 compliant Power over Ethernet (PoE) systems.
The LTC4271 provides a digital interface to the PSE host, while the LTC4270 provides the high-voltage Ethernet interface; the two ICs are then bridged by inexpensive Ethernet transformers. The transformer-isolated communication protocol replaces up to six optocouplers and a complex isolated 3,3 V supply used in traditional designs.
The LTC4270/LTC4271 is suitable for a wide variety of PSE applications, including next-generation switches, routers, hubs and midspans. Designers can take advantage of the robustness provided by 80 V port pins and low power dissipation, easing thermal design. Powered device (PD) discovery is accomplished using a proprietary dual-mode, four-point detection mechanism that ensures immunity from false PD detection.
Advanced power management includes prioritised fast shutdown, 14-bit per port voltage and current readback, 8-bit programmable current limits and 7-bit programmable overload current limits, and field upgradeable firmware. A 1 MHz I²C interface allows a host controller to digitally configure the IC or query port readings. C libraries are available to ease engineering efforts.
The LTC4270 is available in three power grades: A-grade uses Linear’s LTPoE++ signalling to support up to 90 W PDs, B-Grade uses PoE+ signalling to support up to 25,5W PDs, and C-grade uses PoE signalling to support up to 13 W PDs. The chipset is offered in industrial temperature grades.
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...NXP has expanded its MCX A Series Altron Arrow
AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Exploring Bluetooth Channel Sounding Altron Arrow
Telecoms, Datacoms, Wireless, IoT
NXP has enabled BCS on the MCX W72 multi-protocol wireless MCU, which supports Bluetooth Low Energy 6.0, Thread, Zigbee, and Matter.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...Dual-band Wi-Fi 6 companion module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The SimpleLink Wi-Fi CC33xx family of devices from Texas Instruments are dual-band Wi-Fi 6 companion modules enabling engineers to connect more applications with confidence.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version