DSP, Micros & Memory


F-RAM with SPI interface

8 February 2012 DSP, Micros & Memory

Available from Ramtron is a family of 4 Kb to 64 Kb serial non-volatile ferroelectric RAM (F-RAM) products. They feature 1 trillion read/write cycles, low power consumption and NoDelay writes.

The FM25040C, FM25C160C and FM25640C are 4, 16 and 64 Kb memory devices that perform write operations at bus speeds of up to 20 MHz with an industry standard serial peripheral interface (SPI). Data is written to the F-RAM memory array immediately after it is received by the device. Unlike EEPROM and other non-volatile memories that require data polling, F-RAM allows the next bus cycle to commence immediately. These characteristics make the devices well suited for applications that require frequent and rapid writes, such as industrial controls and high-speed data-logging.

The devices operate at 5 V over the complete industrial temperature range of


-40°C to +85°C. In addition, they offer low power consumption with 250 μA active current (typical at 1 MHz clock speed) as well as a sophisticated write protection scheme that prevents inadvertent data writes to the memory. All of the devices are offered in an 8-pin, RoHS-compliant SOIC package.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High performance SDR design considerations
RFiber Solutions Editor's Choice DSP, Micros & Memory
As the spectrum gets increasingly crowded, and adversaries more capable, the task of examining wide bands and making sense of it all, while not missing anything, gets harder.

Read more...
Direct RF converters and FPGAs boost EW applications
RFiber Solutions DSP, Micros & Memory
The latest boost to electronic warfare designs comes from emerging FPGA architectures that combine advanced RF converters and high-performance processing engines in a single package.

Read more...
1-Wire EEPROM with secure authenticator
Altron Arrow DSP, Micros & Memory
The DS28E54 secure authenticator combines FIPS 202-compliant secure hash algorithm (SHA-3) challenge and response authentication with secured electrically erasable programmable read-only memory.

Read more...
Microchip enhances digital signal controller lineup
Future Electronics DSP, Micros & Memory
Microchip Technology has added the dsPIC33AK512MPS512 and dsPIC33AK512MC510 Digital Signal Controller families to its dsPIC33A DSC product line.

Read more...
MCX C Series development board
Avnet Silica DSP, Micros & Memory
The FRDM-MCXC444 is a compact and scalable development board for rapid prototyping of MCX C444 MCU from NXP Semiconductors.

Read more...
Redefining entry-level MCUs
NuVision Electronics DSP, Micros & Memory
The company positions the GD32C231 series as a ‘high-performance entry-level’ solution designed to offer more competitive options for multiple applications.

Read more...
Microchip enhances TrustMANAGER platform
Altron Arrow DSP, Micros & Memory
Firmware over-the-air updates and remote cryptographic key management provide scalable solutions for addressing IoT security challenges.

Read more...
MCU for low-power, IoT applications
NuVision Electronics DSP, Micros & Memory
Silicon Labs recently announced the PG26, a general-purpose microcontroller with a dedicated matrix vector processor to enhance AI/ML hardware accelerator speeds.

Read more...
EEPROMs for industrial and military markets
Vepac Electronics DSP, Micros & Memory
Designed to ensure the data retention and the secure and safe boot of digital systems, the memory product line includes small and medium density EEPROMs from 16 kb to 1 Mb.

Read more...
PLCnext – Open, IIoT-ready industrial platform
IOT Electronics DSP, Micros & Memory
PLCnext can be used alongside an existing PLC system, collecting control system data via EtherNet/IP, PROFINET, or MODBUS, and can push this information to a cloud instance.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved