RS Components is now stocking the Siemens compact 40 A base unit which is part of the SITOP modular power supply series. With new innovations and at only 150 mm wide and 125 mm deep, the PSU300M allows for highly compact tests. The 20 A power supply was also reviewed and is only 70 mm wide.
The two SITOP PSU300M standard mounting rail power supplies, for connection to three-phase 400-500 V a.c. networks, now have a wider range input (from 320 to 575 V a.c.) than previous versions. This enables them to be used in almost all of the world’s three-phase networks, and they provide a reliable 24 V supply even when there are large deviations in the voltage supply.
The user can simply evaluate the ‘DC 24 V OK’ operating mode via the new, integrated dry signalling contact. Apart from its small dimensions, the power unit now supplies 60 A for five seconds, so it can easily switch on even terminal equipment with high starting currents. Its efficiency of up to 92% reduces energy consumption and heat build-up in the control cabinet.
Like all SITOP basic units in the modular series, the new SITOP PSU300M power supplies also have rugged metal enclosures. They can provide up to three times the rated current to meet short-term peak power demands. Moreover, the short circuit response can be set: latching shutdown or constant current with automatic re-ramp up to the output voltage.
Used in combination with SITOP add-on modules, comprehensive protection can be achieved against primary and secondary disturbances. Additional benefits include an LED output indicator, fully regulated output and switchable output characteristic for parallel operation.
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Ultra compact NTC thermistors RS South Africa
Test & Measurement
Murata Manufacturing Co. has expanded its compact NCU03 series of NTC thermistors with two ultra-small 0603M devices tailored for consumer and automotive designs.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...Compact power MOSFET for high current switching Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...DC link capacitors for demanding applications RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...N-channel power MOSFETs TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version