Small 4-slot industrial PC box
15 August 2001
Computer/Embedded Technology
The AEC-6100 Industrial Mini PC box from Aaeon is an ideal housing unit for system integration using any compact card from the company's PC line of compact single board computers. The AEC-6100 special size of 19,1 cm (L) x 21,6 cm (W) x 6,4 cm (H) gives end-users flexibility in movement and placement. Application adapters such as four RS232 ports, one parallel port, and four USB ports are at the rear of the chassis.
There are also two connectors for P/S 2 (mouse and keyboard), Ethernet, three LED indicators, one reset button, MIC_in, Line_in, and Line_out. During the initial designing stages of the Mini PC box, placement of the internal devices was crucial. An exterior air inlet was designed into the roof of the Mini PC box to reduce overheating. In the front of the Mini PC box, there is a slot for installing and retrieving a compact flash card that will offer a larger memory bank.
The Mini PC box is built to house a 2,5" hard drive, however a floppy disk or CD-ROM connection is also possible. Located on the side of Mini PC box is a removable panel, allowing the floppy drive or CD-ROM cable easy entry to the computer board. Located next to the floppy drive slot is a traditional power terminal while a power button is also designed in an easy-to-reach area located next to the power terminal.
The AEC-6100 Mini PC box allows for ease of movement with its overall weight of 2,3 kg.
Centurion Microelectronics
(012) 666 9066
Further reading:
From idea to intelligent product
TRX Electronics
Computer/Embedded Technology
Mouser Electronics has announced a new eBook in collaboration with Arduino – From Blink to Think: How Arduino UNO Q Helps Designers Go from Idea to Intelligent Product.
Read more...
Think Diamond Long-life COM-based SBCs
Electronic Products Design
Computer/Embedded Technology
A COM-based SBC combines the flexibility of a standard computer-on-module (COM) with a baseboard offering additional I/O, expansion sockets, power supplies, and I/O connectors. The result is a highly flexible, highly expandable, feature-dense product that can be adapted to the widest range of applications, offering maximum product lifetime.
Read more...
Next-Gen Min-ITX motherboard
Vepac Electronics
Computer/Embedded Technology
Adding to AAEON’s extensive industrial motherboard portfolio, the Next-Gen MIX-Q870A1 is the company’s most advanced Mini-ITX board to date.
Read more...
Rev 2.0 PolarFire FPGA ethernet sensor bridge
Altron Arrow
Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.
Read more...
Rugged combo antennas cut multi-network installations down to one
iCorp Technologies
Computer/Embedded Technology
Quectel Wireless Solutions has expanded its antenna portfolio with four rugged multi-network combo antennas.
Read more...
Intelligent video processing
Rugged Interconnect Technologies
Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.
Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies
Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.
Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design
Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.
Read more...
Arrival of the Epic-PTH9
Vepac Electronics
Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.
Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design
Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.
Read more...
printer friendly version