Telecoms, Datacoms, Wireless, IoT


Low-profile ADSL transformers

29 August 2001 Telecoms, Datacoms, Wireless, IoT

Coilcraft has introduced a new series of ADSL transformers that measure only 12,5 mm high. Available in surface-mount or leaded versions, these transformers are designed to provide optimum performance with GlobeSpan Titanium Fourte chipsets for central office and customer premises devices.

In addition to their compact size, Coilcraft's AS8952-A and AS8954-A transformers feature very low DC resistance and just 5 µH leakage inductance. Primary inductance is stable from -40 to +85°C and the longitudinal balance is 55 dB from 20 kHz to 1,1 MHz. The parts have been designed to meet UL 1950 requirements.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

M.2 cards bring wireless connectivity options to NXP evaluation boards
23 June 2021, RF Design , Telecoms, Datacoms, Wireless, IoT
u-blox is introducing a set of Wi-Fi 5, Wi-Fi 6 and Bluetooth expansion cards that plug into NXP Semiconductors’ i.MX processor evaluation kits. The cards, which conform to the M.2 form factor, integrate ...

Read more...
DC-14 GHz gain block amplifiers
23 June 2021, RF Design , Telecoms, Datacoms, Wireless, IoT
Recently introduced by Marki Microwave are its first MMIC gain blocks, the AKA series of InGaP HBT amplifiers with a bandwidth of DC to 14 GHz. Four options are available with gain from 13 to 19 dB, P1dB ...

Read more...
Ultra-wideband RMS power detector
23 June 2021, Conical Technologies , Telecoms, Datacoms, Wireless, IoT
Mini-Circuits has released a new coaxial power detector, the ZV47-K44RMS, with a 35 dB linear dynamic range and an error rate of less than ±1 dB. The device has a ±1 dB flat response from 200 MHz to 30 GHz ...

Read more...
Image reject mixer covering 8-26 GHz
26 May 2021, RFiber Solutions , Telecoms, Datacoms, Wireless, IoT
The MAMX-011075 from MACOM Technology Solutions is an image-reject passive diode mixer MMIC offering low conversion loss, high linearity, high image rejection and a wide IF bandwidth. The image-reject ...

Read more...
Partner programme to help wireless developers speed time-to-market
26 May 2021, RF Design , Telecoms, Datacoms, Wireless, IoT
Recently, Nordic Semiconductor announced the launch of the ‘Nordic Partner Program’ (NPP), creating an ecosystem of companies with experience of Nordic’s solutions in order to drive greater adoption of ...

Read more...
Mouser, Molex web resource for 5G and IoT
26 May 2021 , Telecoms, Datacoms, Wireless, IoT
Mouser Electronics and Molex have partnered to create a new resource site devoted to high-speed solutions for future trends in connectivity, including 5G and next-generation Internet of Things (IoT) devices. ...

Read more...
RF loads with frequencies up to 67 GHz
26 May 2021, RF Design , Telecoms, Datacoms, Wireless, IoT
Pasternack has expanded its line of RF loads to address myriad applications involving test, R&D, production, commercial and military RF communications systems. The new parts can be used to terminate ...

Read more...
LTE Cat. 4 modem card with 3G/2G fallback
26 May 2021, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
The Thales Cinterion mPLS83-W IoT modem card simplifies global high-bandwidth IoT connectivity, delivering instant access to high-speed LTE Cat. 4 networks with 3G/2G fallback. Offered in a convenient ...

Read more...
RF blocking switch matrix
26 May 2021, Conical Technologies , Telecoms, Datacoms, Wireless, IoT
Mini-Circuits’ ZT-24X48B is a high-performance, 24 by 48 blocking switch matrix covering the key worldwide telecoms bands from 600 MHz to 6 GHz. The system has been developed in a modular format for ease ...

Read more...
System-on-module for rapid IoT deployment
23 June 2021, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
TT Electronics has introduced the new S-2Connect Creo SOM for rapid IoT deployment. The board is designed for engineers, programmers and developers who are charged with reducing R&D risk and fast-tracking ...

Read more...