Passive Components


0,25 mm high 0402 capacitors

26 September 2001 Passive Components

For applications in mobile RF modules and IC cards generally, low-height capacitors from Murata can be placed underneath the ICs they serve, effectively using no space on the substrate.

Nominal height of the GRM36-019 (new GRP15X5C) is 0,25 mm ±0,05 mm giving a maximum height of 3,0 mm on a 1,0 x 0,5 mm footprint. There are 42 variants in the family, with values from 1,0 to 200 pF, the relatively high values in COG dielectric giving excellent bypass performance. Voltage ratings are 50 V d.c. up to 100 pF and 25 V d.c. above that.

The operating temperature range is a full -55 to 125°C with no capacitance change with time, temperature or DC voltage. Terminations are highly resistant to metal migration.

Packaging is in 8 mm paper tape because of the increased positioning accuracy this provides compared with plastic tape.

Avnet Kopp

(011) 444 2333

[email protected]

www.avnet.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cutting-edge hybrid capacitors
Avnet Silica Passive Components
Panasonic Industry recently announced the launch of the ZVU Series Hybrid Capacitors, a cutting-edge solution tailored to meet the escalating demands of advanced electronic systems.

Read more...
Low-profile tantalum chip capacitors
Electrocomp Passive Components
These general-purpose tantalum capacitors from Kyocera AVX are available in multiple case sizes with low profile options.

Read more...
Coupled inductor for high-performance applications
Passive Components
This coil with MnZn core is characterised by its high permeability and extremely low RDC values, which achieves excellent power density and very high efficiency.

Read more...
Power inductors
iCorp Technologies Passive Components
he HTF-MP series is more suitable for complex multiphase power supply applications in design, effectively meeting the needs of ultra-thin and high-power devices.

Read more...
SMT power inductors
Future Electronics Passive Components
The Würth Elektronik WE-MXGI SMT power inductors are the latest addition to Würth Elektronik’s moulded power inductor series, engineered for high-frequency power applications.

Read more...
Large capacitance MLCCs at 100 V
RS South Africa Passive Components
TDK Corporation has expanded its CGA series for automotive multilayer ceramic capacitors to 10 µF at 100 V in 3225 size.

Read more...
Film and mica capacitors
Actum Electronics Passive Components
By utilising various polymer dielectrics plastics, Exxelia film and mica capacitors meet most technical requirements and serve all functions from standard filtering to specialised applications.

Read more...
Power-over-coax inductors
RS South Africa Passive Components
TDK has expanded the ADL3225VF series of wire-wound inductors for automotive power-over-coax (PoC).

Read more...
Thick film power resistors
Electrocomp Passive Components
Vishay has released a new product to the market, its thick film power resistor, which is offered in a clip-mount TO-247 package.

Read more...
Compact EMI suppression capacitors
RS South Africa Passive Components
These new components from TDK are 20% smaller than previous models and meet Grade III Test B standards for temperature, humidity, and bias.

Read more...