The MIC-3376 from Advantech is a 6U CompactPCI single board computer which accepts Pentium processors up to 600 MHz and higher for optimum computing capability. Based on Intel's 440BX chipset, the device's performance is enhanced by a 100 MHz front-side bus.
With the support of a 66 and 100 MHz bus clock and CPU on-chip 512 KB L2 cache memory, the MIC-3376 can fulfill customers expectations of high-performance computing capability.
A CPU heatsink specially designed for the SECC 2 PentiumIII processor enables the MIC-3376 to operate without a cooling fan on the heatsink.
An optional Ultra2 SCSI interface is optionally available on the front panel. It provides connection to the external RAID system and other SCSI devices with data transfer rates up to 80 MBps. The dual onboard fast Ethernet channels provide teaming functions such as adapter fault tolerance, adaptive load balancing and Fast EtherChannel to increase transmission throughput and reliability. Single or dual PCI-to-PCI bridge options enable the system to drive up to 7/14 PCI master devices.
The MIC-3376 offers all the I/O functions of an industrial computer with the rugged Eurocard form factor. All I/O connectors, reset button and LEDs are placed on the front panel. The built-in high-speed PCI IDE controller provides two separate IDE channels with Ultra DMA/33 mode.
The user-defined J3 connector is designed to support up to four IDE devices and two FDDs. These drives can simply be connected to the backplane or the rear transition board for easy service and maintenance.
Designed for use in mission critical applications, the SBC accepts a CompactFlash memory card, eliminating the need for a rotating hard drive. A watchdog timer can automatically reset the system or generate an interrupt if the system stops due to a program bug or EMI. Connectors are firmly screwed to the front panel, and the replaceable shielding gasket is attached to the panel edge. This reduces emissions and gives better protection against external interference.
From idea to intelligent product TRX Electronics
Computer/Embedded Technology
Mouser Electronics has announced a new eBook in collaboration with Arduino – From Blink to Think: How Arduino UNO Q Helps Designers Go from Idea to Intelligent Product.
Read more...Think Diamond Long-life COM-based SBCs Electronic Products Design
Computer/Embedded Technology
A COM-based SBC combines the flexibility of a standard computer-on-module (COM) with a baseboard offering additional I/O, expansion sockets, power supplies, and I/O connectors. The result is a highly flexible, highly expandable, feature-dense product that can be adapted to the widest range of applications, offering maximum product lifetime.
Read more...Next-Gen Min-ITX motherboard Vepac Electronics
Computer/Embedded Technology
Adding to AAEON’s extensive industrial motherboard portfolio, the Next-Gen MIX-Q870A1 is the company’s most advanced Mini-ITX board to date.
Read more...Rev 2.0 PolarFire FPGA ethernet sensor bridge Altron Arrow
Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.
Read more...Intelligent video processing Rugged Interconnect Technologies
Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.
Read more...Nordic expands nRF Cloud with firmware vulnerability scanning RF Design
Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.
Read more...Arrival of the Epic-PTH9 Vepac Electronics
Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version