Interconnection


IP67 connectors

10 August 2016 Interconnection

RS Components has extended its portfolio of high-quality connectivity solutions with the EDAC 572 and 560 series of IP67-rated connectors, which offer simple, safe connections for a wide variety of outdoor and ruggedised applications including LED lighting, medical, marine and hydroponic cultivation, access control, external signage and refrigerated displays.

Fully waterproof and dustproof, the 572 (5,8 mm pitch) and 560 (2,5 mm pitch) series connectors are available in wire-to wire and wire-to-board options. They extend EDAC’s popular range of E-Seal IP67-rated connectors to include D-Sub, USB, HDMI, wire-to-board and wire-to-wire connectors, and support low-level signal and power requirements up to 300 V at 10 A, with an operating temperature range of between –40°C and +105°C.

The connectors offer absolute protection against dirt and dust and the company’s fast integral seal technology provides waterproof operation with immersion in water up to a depth of 1 m for up to 30 minutes, with the double latch solution providing a tactile double click when fully mated. They are highly resilient to vibration and available in a choice of four colour-coded sizes to accommodate wire diameters from 1,7 to 3,1 mm.

Electrical integrity is ensured by internal polarisation, which eliminates the possibility of mismating the connectors; plus wire termination is made with a true crimp and poke home contact solution. The wire seals are pre-assembled onto each wire within the housing when crimping the contacts to the cable, with no external sealing required.

The 560 series connectors are provided with a waterproof cap to cover holes of a wire seal to seal any unused contact positions. The devices are available in 2, 3 or 5 contact positions and feature a 2,5 mm pin pitch and are current rated to a maximum of 3 A, 250 V a.c. The 572 series offers 1, 2 or 3 contact positions with a 5,8 mm pitch and a maximum current rating of 10 A at 300 V a.c.

For more information contact RS Components, +27 (0)11 691 9300, [email protected], www.rsonline.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

3-terminal filters for automotive applications
RS South Africa Power Electronics / Power Management
TDK has expanded its YFF series of 3-terminal filters for automotive applications to include higher voltages up to 35 V and higher capacitances up to 4,7 µF.

Read more...
Blade terminals deliver greater power density
Spectrum Concepts Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.

Read more...
What’s the big deal with open pin fields?
Spectrum Concepts Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.

Read more...
Hirose Electric’s push-on bayonet lock connectors
Avnet Abacus Interconnection
Hirose Electric’s HR22K Series is a compact, waterproof, and oil-resistant connector designed for demanding industrial environments.

Read more...
Industrial Ethernet time sensitive networking switch
RS South Africa Telecoms, Datacoms, Wireless, IoT
The ADIN3310 and ADIN6310 are 3-port and 6-port Gigabit Ethernet time sensitive networking (TSN) switches with integrated security primarily designed for industrial Ethernet applications.

Read more...
New connector for Push-X technology
Phoenix Contact Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.

Read more...
Large capacitance MLCCs at 100 V
RS South Africa Passive Components
TDK Corporation has expanded its CGA series for automotive multilayer ceramic capacitors to 10 µF at 100 V in 3225 size.

Read more...
Test cable designed for maximum ruggedness
Conical Technologies Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.

Read more...
Power-over-coax inductors
RS South Africa Passive Components
TDK has expanded the ADL3225VF series of wire-wound inductors for automotive power-over-coax (PoC).

Read more...
Safe connection under load
Phoenix Contact Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.

Read more...