DSP, Micros & Memory


Joint-developed voice-access development platform shortens development time

30 January 2002 DSP, Micros & Memory

Intersil is combining its subscriber line interface circuits (SLICs) with digital signal processors (DSPs) from VoicePump, a subsidiary of DSP Group, for a new four-channel, voice-over-packet (VoP) development platform and reference design. The combination provides manufacturers of low-to-medium-density voice gateways and integrated access devices with a more cost-effective, short time-to-market system.

The reference design combines four compact Intersil HC55185 ringing SLICs in MLF package with VoicePump's programmable four-channel VP140 mixed-signal DSP. The VP140 is a member of VoicePump's VP100 family and is designed to integrate DSP Group's TeakLite DSP core with most of the circuitry needed to accommodate four packet-voice channels in a single processor. Intersil and VoicePump anticipate that their development platform will provide customers with a complete turnkey solution that shortens time-to-market and reduces engineering/design costs for VoP integrated access devices (IADs) used with voice over digital subscriber line (VoDSL), voice over Internet protocol (VoIP), or voice over broadband (VoB) technologies in general.

Arrow Altech Distribution, (011) 923 9600

Avnet Kopp, (011) 444 2333

EBV-Electrolink, (021) 421 5350



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Wi-Fi 6 and Bluetooth LE co-processor
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.

Read more...
High performance SDR design considerations
RFiber Solutions Editor's Choice DSP, Micros & Memory
As the spectrum gets increasingly crowded, and adversaries more capable, the task of examining wide bands and making sense of it all, while not missing anything, gets harder.

Read more...
Direct RF converters and FPGAs boost EW applications
RFiber Solutions DSP, Micros & Memory
The latest boost to electronic warfare designs comes from emerging FPGA architectures that combine advanced RF converters and high-performance processing engines in a single package.

Read more...
Empowering innovation with ST’s AI processors
Altron Arrow AI & ML
Artificial intelligence is no longer just a futuristic concept – it is here, and it is transforming industries at an unprecedented pace.

Read more...
1-Wire EEPROM with secure authenticator
Altron Arrow DSP, Micros & Memory
The DS28E54 secure authenticator combines FIPS 202-compliant secure hash algorithm (SHA-3) challenge and response authentication with secured electrically erasable programmable read-only memory.

Read more...
Chip provides concurrent dual connectivity
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
The IW693 from NXP is a 2x2 dual-band, highly integrated device that provides concurrent dual Wi-Fi 6E + Wi-Fi 6 and Bluetooth connectivity, supporting four different modes.

Read more...
The 6 GHz band radio solution
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Analog Devices’ 16 nm transceiver family offers a highly integrated solution for this new frequency band, featuring low power consumption and high performance.

Read more...
New clock generator family
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Based on Skyworks’ fifth generation DSPLL and MultiSynth technologies, these devices enable any-frequency, any-output clock generation.

Read more...
Dual accelerometers on the same die
Altron Arrow Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.

Read more...
Microchip enhances digital signal controller lineup
Future Electronics DSP, Micros & Memory
Microchip Technology has added the dsPIC33AK512MPS512 and dsPIC33AK512MC510 Digital Signal Controller families to its dsPIC33A DSC product line.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved