The SE2-MOOD from EKF is a peripheral slot card for CompactPCI Serial systems, equipped with three M.2 sockets for SSD (solid-state drive) modules.
Two of the M.2 sockets are suitable for NVMe type SSD modules, with a PCIe x4 Gen3 interface for superior data transfer rates. When used as main mass storage devices in a system, the NVMe SSDs can speed up the overall system performance dramatically. The third (optional) M.2 connector can accommodate a classic AHCI SATA style SSD, used e.g. as backup drive or legacy systems boot device.
With respect to the NVMe sockets, the SE2-MOOD is suitable for all NGFF SSD module sizes defined by the M.2 specification up to the 22110 form factor (SATA socket max. 2280). In order to avoid mix-up, the M.2 sockets are mechanically coded. The NVMe module sockets are provided with an M-key, and the SATA module connector features a B-key, according to the PCI Express M.2 Specification (PCI-SIG).
For optimum NVMe SSD module performance, a PCI Express x8 enabled backplane slot would be required (CompactPCI Serial fat pipe slot). In addition, SATA backplane support is needed for the SATA SSD module.
First NVMe SSD Built with 8th-gen BiCS FLASH EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...QuecPi smart development board iCorp Technologies
Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.
Read more...Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.
Read more...Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.
Read more...Embedded module for AI vision applications Rugged Interconnect Technologies
DSP, Micros & Memory
The TQMa95xxSA supports AI/ML with vision applications through an integrated NPU and an image processor unit.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...Computing in industrial environments Vepac Electronics
Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.
Read more...DDR5 DRAM series Vepac Electronics
Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.
Read more...Generate waveforms at 10 GS/s Vepac Electronics
Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.
Read more...Quad-port 10GBASE-T controller Rugged Interconnect Technologies
Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.
printer friendly version