Telecoms, Datacoms, Wireless, IoT


SDH/SONET 4:1 serialiser

13 February 2002 Telecoms, Datacoms, Wireless, IoT

The MAX3892 from Maxim is a serialiser ideal for converting 4-bit-wide, 622 Mbps parallel data to 2,5 Gbps serial data in DWDM and SONET/SDH applications. A 4 5 4-bit FIFO allows for any static delay between the parallel output clock and parallel input clock. Delay variation up to a unit interval (UI) is allowed after reset. A fully integrated phase-locked loop (PLL) synthesises an internal 2,5 GHz serial clock from a 622 MHz, 155,5 MHz, 77,8 MHz, or 38,9 MHz reference clock. A selectable dual VCO allows superior jitter performance at both SONET and forward-error correction (FEC) data rates.

Operating from a single 3,3 V supply, this device accepts low-voltage differential-signal (LVDS) clock and data inputs for interfacing with high-speed digital circuitry, and delivers current-mode logic (CML) serial data and clock outputs. A loopback data output is provided to facilitate system diagnostic testing.

The MAX3892 is available in the extended temperature range (-40 to +85°C) in 44-pin QFN package.

CST Electronics

(011) 452 0706





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Otto Wireless reveals RAD new product line
29 July 2020, Otto Wireless , Telecoms, Datacoms, Wireless, IoT
As a world leader in the telecommunications field with over 39 years of innovation, a significant worldwide presence in over 150 countries and an installed base of more than 16 million network elements, ...

Read more...
New benchmark in low-cost LTE to be released soon
29 July 2020, Otto Wireless , Telecoms, Datacoms, Wireless, IoT
SIMCom, represented locally by Otto Wireless Solutions, has expanded its family of SIM7600, LTE Cat. 1 devices, and is due to unveil a new flagship product, which is expected to take the 4G market by ...

Read more...
Multi-sensor IoT module
29 July 2020, Electrocomp , Telecoms, Datacoms, Wireless, IoT
TDK announced worldwide availability of the InvenSense SmartBug, a compact, wireless multi-sensor solution designed for a plethora of commercial and consumer IoT applications. The out-of-the-box solution ...

Read more...
Bluetooth SiP for wearables and medical devices
30 June 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
Nordic Semiconductor announced that Tangshan, China-based Tangshan Hongjia Electronic Technology has selected Nordic’s nRF52840 Bluetooth 5.2/Bluetooth Low Energy (Bluetooth LE) advanced multiprotocol ...

Read more...
Adhesive mount combo antenna
30 June 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The Taoglas MA256.A is a 3-in-1 adhesive mount combination antenna for use in cases requiring worldwide 4G coverage and GPS/GLONASS/BeiDou/Galileo for positioning. The MA256 has been designed to be mounted ...

Read more...
Diodes for RF/microwave applications
30 June 2020, Hi-Q Electronics , Telecoms, Datacoms, Wireless, IoT
Skyworks’ broad portfolio of PIN, limiter, Schottky, and varactor diodes are ideal for WLAN, infrastructure, handset, Satcom (LNB/DBS-CATV), automotive, aerospace and defence, test and measurement, metering, ...

Read more...
Small form factor 5G/4G antenna
30 June 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The Taoglas Olympian II G45 is a low-profile, robust external 5G/4G antenna. The permanent mount antenna has a small form factor at only 48,5 mm tall and 50 mm in diameter. It is ideal for external use, ...

Read more...
Dual-core wireless MCU
30 June 2020, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
The STM32WBx0 is a dual-core wireless MCU based on an Arm Cortex-M4 core running at 64 MHz (application processor) and an Arm Cortex-M0+ core at 32 MHz (network processor). The STM32WBx0 Value Line ...

Read more...
MIFARE DESFire EV3 IC
30 June 2020, EBV Electrolink , Telecoms, Datacoms, Wireless, IoT
NXP Semiconductors announced its new MIFARE DESFire EV3 IC that ushers in next-generation performance, advanced security and seamless integration of mobile services for a new era of security and connectivity ...

Read more...
Cellular chipset for global low-power IoT
30 June 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The UBX-R5 Series from u-blox is a global multi-band cellular chipset that supports LPWA, LTE-M and NB-IoT technologies. It is optimised for IoT applications such as smart metering, telematics, tracking, ...

Read more...