Vishay Intertechnology expanded its portfolio of power modules in the SOT-227 package with seven new devices featuring ThunderFET power MOSFETs and standard, FRED Pt, and Trench MOS Barrier Schottky (TMBS) diodes. The modules are available in dual, single-phase bridge, and single-switch topologies with a variety of current and voltage ratings.
The VS-FC420SA15 and VS-FC270SA20 single-switch modules featuring ThunderFET power MOSFETs are Vishay’s first with voltages of 150 V and 200 V, respectively. Ideal for high-performance DC-DC converters, battery chargers, AC motor drives and UPSs, the devices offer current to 400 A, low on-resistance down to 1,93 mΩ at 10 V, and gate charge of 250 nC.
Vishay’s first 1200 V insulated standard recovery rectifier modules in the SOT-227 package, the VS-RA160FA120 and VS-RA220FA120, are optimised for OR-ing applications in electric vehicle chargers and single- and three-phase bridges. The dual devices feature high forward current to 220 A, low 0,26°C/W junction-to-case thermal resistance, and low forward voltage drop down to 1,22 V.
Featuring FRED Pt diodes, Vishay’s VS-UFH280FA30 insulated Hyperfast rectifier module is the company’s first to feature 300 V in a dual topology, while the VS-UFH60BA65 is its first Ultrafast single-phase bridge device. Intended for low-voltage, high-frequency inverters in welding machines and UPS, and output rectification for charging stations and switch mode power supplies, the devices offer soft recovery characteristics, fast reverse recovery times down to 58 ns, and current to 280 A.
For high-frequency switch mode power supplies, DC-DC converters and plasma cutters, Vishay’s new VS-QA300FA17 insulated TMBS rectifier module is the company’s first with a 170 V rating. Offered in a dual topology, the device features current of 300 A, low forward voltage of 0,98 V at 200 A, and low junction-to-case thermal resistance of 0,26°C/W per leg (0,13°C/W per module).
While competing devices typically offer operating temperatures to +150°C, these new power MOSFET, Hyperfast and TMBS modules provide high temperature performance to +175°C. The devices are RoHS-compliant and UL-approved.
Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...Cost-effective microcontroller series Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...Understanding two key tools for cleaner serial data Altron Arrow
Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...Ultra-low jitter clocks Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Skyworks has introduced a new family of ultra-low jitter programmable clocks designed to meet the increasing demands of next-gen connectivity.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version