Communication Techniques has introduced a new EDRS Series synthesizer. The EDRS Series synthesizers provide superior phase noise performance and very high immunity to phase hits as well as fine frequency steps up to 15 GHz or higher for the expanding point-to-point/multipoint marketplace as well as for the established satcom, telecom, radar and instrumentation markets, according to the manufacturer.
The EDRS can provide virtually any needed step size down to <1 Hz and can cover up to 1200 MHz bandwidth. Phase noise can be optimised in order to best match system requirements and can be specified either as a mask or as weighted integrated noise. It has a small footprint and a choice of options such as serial or parallel programming, internal or 5-100 MHz external reference, internal IFLO and single DC supply capability.
CTI can custom-configure the EDRS for special system requirements such as wider bandwidths, extended frequency ranges, dual synthesizer packages and alternative interfaces.
SMT-mountable card connectors
Telecoms, Datacoms, Wireless, IoT
Würth Elektronik introduces four new SMT-mountable Nano SIM and microSD card connectors and expands its range with solutions for the smallest packages.
Read more...Module for smart city and smart utility devices iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has launched the Quectel KCM0A5S, a high-performance Wi-SUN module designed for smart applications such as street lighting, precision agriculture, industrial IoT, smart meters and smart cities.
Read more...Ultra-low-power wireless module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STM32WBA5MMG from STMicroelectronics is an ultra-low-power, small form factor, certified 2,4 GHz wireless module that supports Bluetooth LE, Zigbee 3.0, OpenThread, and IEEE 802.15.4 proprietary protocols.
Read more...Energy harvesting and Matter for smarter homes RF Design
Power Electronics / Power Management
Qorvo’s collaboration with e-peas on the Matter Enabled Light Switch marks another significant step in advancing Matter adoption across the IoT industry.
Read more...Quectel partners with GEODNET Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has partnered with GEODNET to deliver Quectel’s Real-Time Kinematic (RTK) correction services, enabling high-precision positioning for IoT applications.
Read more...Bringing Bluetooth Channel Sounding to automotive and beyond with KW47 Altron Arrow
Telecoms, Datacoms, Wireless, IoT
NXP’s new Channel Sounding-certified KW47 and MCX W72 wireless MCUs are set to help automakers with distance measurement, bringing an additional ranging solution for car access and autonomous systems, and will be utilised across a broader spectrum of applications.
Read more...Dual-band GNSS antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The Taoglas Accura GVLB258.A, is a passive, dual-band GNSS L1/L5, high-performance antenna for high precision GNSS accuracy and fast positioning.
Read more...What is Wi-Fi HaLow and why choose it for IoT? iCorp Technologies
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Wi-Fi HaLow introduces a low power connectivity option that, in contrast to other Wi-Fi options, offers greater range of approximately 1 km, which opens up a raft of IoT use cases.
Read more...Wi-Fi 6 and Bluetooth LE coprocessor module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The ST67W611M1 from STMicroelectronics boasts an all-in-one design which, together with its capabilities, contribute to making it an attractive choice for IoT edge devices requiring a single-chip solution.
Read more...Futureproofing IoT connectivity SIMcontrol
Telecoms, Datacoms, Wireless, IoT
A managed private APN assigns every device to an isolated carrier slice, producing a single ingress to the enterprise network, with traffic bypassing shared internet paths and reducing exposure.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version