Telecoms, Datacoms, Wireless, IoT


1,5 A DC-DC boost converter uses 1 mm inductors

27 February 2002 Telecoms, Datacoms, Wireless, IoT

Linear Technology's LT1946A is a fixed frequency step-up DC/DC converter incorporating a 1,5 A, 36 V internal switch. The 2,7 MHz switching frequency allows the use of a 1,5 µH inductor, which is available in a low profile (1mm) package, as well as tiny, low value ceramic capacitors, making the entire solution profile under 1,1mm. The LT1946A operates from an input voltage range of 2,6 V to 16 V, and can generate output voltages up to 34 V. It is capable of generating 430 mA at 8 V from a 3,3 V input, making it ideal for large TFT-LCD displays. Similar to LT1946 (1,2 MHz), soft-start is controlled with an external capacitor, which determines the input current ramp during start up. To optimize thermal management, the LT1946A has been packaged in a thermally enhanced 8-lead MSOP.

Memec SA, 021 674 4103





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Multi-protocol IoT prototyping platform
RF Design Telecoms, Datacoms, Wireless, IoT
The Nordic Thingy:53 brings dual-core Arm Cortex-M33 processing power and embedded machine learning to rapid IoT product prototyping.

Read more...
Quectel launches a high-performance single-band GNSS module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The LC76G GNSS positioning module features fast and accurate position location performance as well as ultra-low power consumption.

Read more...
Power amplifier operates from 17,3 to 21,2 GHz
RF Design Telecoms, Datacoms, Wireless, IoT
The new QPA1724 power amplifier from Qorvo delivers a saturated output power of 20 W over the full frequency range.

Read more...
Directional coupler has a frequency range from 0,6 to 40 GHz
RF Design Telecoms, Datacoms, Wireless, IoT
The CE10-0R640 coupler from Marki Microwave is a 10 dB broadband directional coupler with directivity of 22 dB and insertion loss less than 2,3 dB.

Read more...
RF amplifier with low phase noise
RF Design Telecoms, Datacoms, Wireless, IoT
The APM-7516 is available in a connectorised module that measures 2,85 x 1,5 x 1 cm, with 2,92 mm connectors.

Read more...
‘World’s smallest’ LTE Cat 4 module with global coverage and 2G/3G fallback
RF Design Telecoms, Datacoms, Wireless, IoT
LARA-L6 is ideal for size-constrained applications such as video surveillance, dashcams, telematics, gateways, routers and connected health devices.

Read more...
Eight-way bandpass filter bank
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The AM3215 from Atlanta Micro is a broadband, eight-way bandpass filter bank offering low loss and high rejection from 2 GHz to 18 GHz. Each band delivers 2 GHz of bandwidth. With internal 50 Ω matching ...

Read more...
Front-end module for Wi-Fi 6/6E
RF Design Telecoms, Datacoms, Wireless, IoT
Qorvo’s QPF4632 is a Wi-Fi 6/6E (802.11 ax) integrated front-end module that operates from 5,945 to 7,125 GHz. It consists of a power amplifier (PA), DC logarithmic power detector, single-pole double-throw ...

Read more...
Development kit for Bluetooth LE Audio
RF Design Telecoms, Datacoms, Wireless, IoT
The highly configurable kit can function as a USB dongle to send and receive high-quality audio data from a PC, a business headset or a TWS earbud

Read more...
RF cavity filters for 5G
Electrocomp Telecoms, Datacoms, Wireless, IoT
Temwell has established a one-stop service for 5G RF cavity filters, featuring high specifications across a wide range of power requirements.

Read more...