Telecoms, Datacoms, Wireless, IoT


+3 V DPDT 5 to 6 GHz diversity switch

17 July 2002 Telecoms, Datacoms, Wireless, IoT

Hittite Microwave's HMC436MS8G is a low insertion loss, +3 V DPDT switch for 802.11a/HiperLAN WLAN and UNII PT-PT/Multi-PT 5,1 to 5,9 GHz applications. This device is an integrated antenna diversity and transmit/receive switch that provides a low 1 dB insertion loss while handling up to +30 dBm RF input power from 0/+3 V d.c. control inputs. Port to port isolation is over 20 dB with better than 20 dB return loss on any port. Packaged in a low profile, 1 mm high 8 lead MSOP surface mount package, the HMC436MS8G is ideally suited for 802.11a NIC and access point front-end switching.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

RF fixed chip attenuators
29 January 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The TT5 Series from Smiths Interconnect are Q-band chip attenuators that operate from DC to 18 GHz. The broadband attenuators are available in attenuation values from 0 to 20 dB in 0,5 dB increments and ...

Read more...
Our 5G world in 2025: what to expect, how to make it happen
26 February 2020, Lambda Test , Telecoms, Datacoms, Wireless, IoT
The complexity of 5G exacerbates known challenges and introduces challenges of a different nature to the network lifecycle approach, while the significance of investment and regulation should not be overlooked either.

Read more...
Front end module for RF range extension
26 February 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The nRF21540 is a ‘plug and play’ range extender offering enhanced link robustness with an integrated power amplifier (PA)/low noise amplifier (LNA) for use in Nordic Semiconductor’s low-power, short-range ...

Read more...
LoRa module with Bluetooth LE support
26 February 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
The RAK4600 LoRa module is powered by an nRF52832 microcontroller from Nordic Semiconductor and an SX1276 LoRa chip from Semtech. It has ultra-low power consumption of 2,0 µA in sleep mode, high LoRa ...

Read more...
915 MHz radio module
26 February 2020, Würth Elektronik eiSos , Telecoms, Datacoms, Wireless, IoT
Würth Elektronik’s new Themisto-I radio module features high output power and can attain ranges of up to 10 km. Proprietary network solutions for IIoT/M2M applications can be implemented in a short ...

Read more...
Full IoT hardware and software platform
26 February 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The Taoglas EDGE Connect solution is a next-generation IoT hardware and software platform that provides full cellular, Bluetooth and GPS capabilities with sensor integration – all from an ultra-low-power ...

Read more...
Patch antenna for positioning
26 February 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The ADFGP.25A from Taoglas is an embedded dual-pin patch antenna that covers GPS L1, GLONASS L1CR and L1PT, Galileo E2 and L1, and BeiDou B1 bands. It delivers a gain of over 32,8 dB with a 3 V supply ...

Read more...
BT 5 module supports NFC, Thread and Zigbee
26 February 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The BMD-341 from u-blox is a standalone Bluetooth 5 module that supports NFC, Thread and Zigbee (IEEE 802.15.4) connectivity for portable, extremely low-power embedded systems. This module is based ...

Read more...
RF variable attenuator
29 January 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The 4209-30-63-1 from API Technologies - Weinschel is a solid-state programmable attenuator that operates from 0,1 to 30 GHz. It has an attenuation range from 0 to 63 dB with a step size of 0,5 dB and ...

Read more...
Thingstream extends LoRaWAN support
29 January 2020, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
It is now possible to add LoRaWAN gateways and LoRaWAN devices to Thingstream, giving developers quick, easy on-boarding, and the full power of Thingstream’s MQTT broker, and Data Flow Manager. This new ...

Read more...