Telecoms, Datacoms, Wireless, IoT


USB 2.0 controller

28 August 2002 Telecoms, Datacoms, Wireless, IoT

NEC Electronics' (Europe) 2nd Generation USB 2.0 (data transfer rates to 480 Mbps) to IDE bridge device enables an enhanced single chip interface for ATA/ATAPI products such as HDDs, CDs and DVDs. The µPD720130 is USB-IF certified and maintains compatibility with USB 1.1. The device integrates the USB 2.0 transceiver, serial interface engine (SIE), and end point controller (EPC) together with an IDE controller and a 16 bit CISC microprocessor and on chip ROM/RAM to control the operation of the device. Supporting both LBA48 and Ultra DMA66 specifications it comes in 100-pin LQFP (14 x 14 mm) package.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

RF variable attenuators
29 April 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The AN7 Thermopad series from Smiths Interconnect are temperature variable chip attenuators that operate from DC to 6 GHz. The Thermopad is a totally passive absorptive microwave attenuator, which provides ...

Read more...
V2X made more accessible by new u-blox module
29 April 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
u-blox announced its latest contribution to vehicle-to-everything (V2X) technology: the VERA P3 V2X module. Based on the u-blox UBX P3 V2X chip, VERA P3 puts automotive OEMs, Tier 1s and manufacturers ...

Read more...
Bluetooth evaluation kit
29 April 2020, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
The Cypress CYW920719B2Q40EVB-01 evaluation kit enables users to evaluate and develop single-chip Bluetooth applications using the CYW20719, an ultra-low-power dual-mode Bluetooth 5.0 wireless MCU (microcontroller) ...

Read more...
Easy-to-use Wi-Fi module
29 April 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
The ESP-07S Wi-Fi module was developed by Ai-Thinker Technology. The core processor ESP8266 integrates the advanced Tensilica L106 ultra-low-power, 32-bit MCU (microcontroller) in a small package with ...

Read more...
X-band GaN power amplifier
29 May 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The QPA2611 from Qorvo is an X-band GaN power amplifier (PA) that operates from 8 to 12 GHz. It delivers more than 5 W of saturated output power with a large signal gain of 26 dB and PAE (power added ...

Read more...
Bluetooth and Wi-Fi combo module
29 May 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
FSC-BW121 is a Bluetooth and Wi-Fi combo RF module which supports both Bluetooth 4.2 dual mode and Wi-Fi 802.11 a/b/g/n/ac standards. It requires an external MCU (microcontroller) to execute a Bluetooth ...

Read more...
4G serial routers
29 May 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
The 4G serial server devices HF2421 and HF2421G provide protocol conversion between RS-232/RS-485/RS-422 interfaces and Ethernet/Wi-Fi and 3G/4G, which can meet the solution requirements for serial/network ...

Read more...
WLAN MIMO antenna with four ports
29 May 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The FXP.524 Venti antenna is a 4-in-1 MIMO, flexible PCB monopole type antenna. Made by Taoglas, the antenna has excellent efficiency and isolation performance for dual-band Wi-Fi applications. It has ...

Read more...
Out-of-the-box spoofing mitigation with Galileo’s OS-NMA service
29 May 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
Over the past two decades, satellite-based positioning has become an indispensable, everyday technology that we constantly rely on – often even without being aware of it. With the relentless expansion ...

Read more...
Drive testing of 2G, 3G, 4G and 5G NR mobile networks
29 May 2020, Coral-i Solutions , Telecoms, Datacoms, Wireless, IoT
Nemo Outdoor is a laptop-based drive test tool for 2G, 3G, 4G and 5G NR mobile network testing which supports over 300 devices and scanning receivers, from various vendors, all the latest network technologies ...

Read more...