Slimline cPCI system
9 October 2002
Computer/Embedded Technology
A 1 U high, 84 HP wide and 305 mm deep cPCI member has been added to Elma Trenew Electronic's range of CompactPCI Integrated Systems.
The rugged 19-inch hot-dip galvanised sheet steel construction can be used in desktop or rack-mountable applications and incorporates the following features:
* 6U backplane with 2 slot to the front and 2 slot rear I/O.
* Integrated fan control in backplane.
* Horizontal ventilation by three fans (exhaust).
* Superior EMC shielding even for applications in a high-frequency range.
* Drive bay for one 3,5 inch HDD or up to 2,5 inch HDD Main connection and main switch in the rear, Inhibit and LED in front panel fully compliant to IEEE 1101.10/.11.
EMC shielding is superior even in high-frequency range. The standard version will be produced with a black powder-coated front panel although different colours can be made available if required. The two slot backplane, for the horizontal installation of up to two boards 6U x 160 mm from the front, comes with two rear I/O boards slots 6U x 80 mm. To increase functionality the enclosure also has space to install one 3,5 inch HDD or 2 x 2,5 inch HDD.
For higher power requirements Elma offers the flexible 200 W power supply unit with active PFC for input voltages of 90-264 V a.c.
The good thermal characteristics of the unit are achieved via three fans. The fan is also controlled via electronics integrated into the backplane.
Elma's 1U CompactPCI system can accommodate one one-slot or one dual-slot single board computer. Target markets are in datacoms and telecoms (for example Net Routers and the Net gateway markets).
Further reading:
From idea to intelligent product
TRX Electronics
Computer/Embedded Technology
Mouser Electronics has announced a new eBook in collaboration with Arduino – From Blink to Think: How Arduino UNO Q Helps Designers Go from Idea to Intelligent Product.
Read more...
Think Diamond Long-life COM-based SBCs
Electronic Products Design
Computer/Embedded Technology
A COM-based SBC combines the flexibility of a standard computer-on-module (COM) with a baseboard offering additional I/O, expansion sockets, power supplies, and I/O connectors. The result is a highly flexible, highly expandable, feature-dense product that can be adapted to the widest range of applications, offering maximum product lifetime.
Read more...
Next-Gen Min-ITX motherboard
Vepac Electronics
Computer/Embedded Technology
Adding to AAEON’s extensive industrial motherboard portfolio, the Next-Gen MIX-Q870A1 is the company’s most advanced Mini-ITX board to date.
Read more...
Rev 2.0 PolarFire FPGA ethernet sensor bridge
Altron Arrow
Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.
Read more...
Rugged combo antennas cut multi-network installations down to one
iCorp Technologies
Computer/Embedded Technology
Quectel Wireless Solutions has expanded its antenna portfolio with four rugged multi-network combo antennas.
Read more...
Intelligent video processing
Rugged Interconnect Technologies
Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.
Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies
Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.
Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design
Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.
Read more...
Arrival of the Epic-PTH9
Vepac Electronics
Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.
Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design
Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.
Read more...
printer friendly version