Maxim's 128-step, high-voltage digital potentiometers, available in a 5 x 3 mm microMAX package are half the size of comparable devices in an 8-pin SO. These MAX5437/MAX5439 devices include a general-purpose, on-chip, high-voltage, uncommitted operational amplifier, which provides additional reductions in board space and cost.
These new digital pots use dual operating voltages of ±5 to ±15 V, or single operating voltages, such as 0 to +10 V, 0 to +15 V, or 0 to +30 V. They are excellent for liquid crystal display (LCD) contrast adjustment or high-voltage trimming applications. Other features include low 35ppm/°C end-to-end and 5 ppm/°C ratiometric resistor temperature coefficients, a 3-wire SPI/QSPI/MICROWIRE-compatible serial interface, power-on reset to midscale, and an amplifier shutdown mode.
The MAX5436/MAX5437 are available in 50 kW resistances and the MAX5438/MAX5439 in 100 kW resistances.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Banana Pi with NPU CST Electronics
AI & ML
The latest Banana Pi SBC, the BPI-M7, is powered by Rockchip’s latest flagship RK3588 octa-core 64-bit processor, with a maximum frequency of 2,4 GHz.
Read more...Hardened-grade network switches CST Electronics
Computer/Embedded Technology
Lantronix’s hardened switches provide Layer 2 or Layer 3 networking, and are available as Power-over-Ethernet (PoE) or Power-over-Ethernet Plus (PoE+).
Read more...Energy measurement IC CST Electronics
Power Electronics / Power Management
The SY7T501 and SY7T502 are Silergy’s newest energy measurement ICs for cost-sensitive IoT applications such as smart-plugs, dimmers, power-strips, intelligent lighting, and other points of load.
Read more...Easy wireless mesh networking CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has announced three new NeoMesh Click boards that are ideal for wireless mesh networking, eliminating the need for engineers to create any development PCB hardware themselves.
Read more...LoRa transceiver module CST Electronics
Telecoms, Datacoms, Wireless, IoT
The RYLR896 transceiver module from REYAX features the LoRa long range modem that provides ultra-long range spread spectrum communication.
Read more...High-performance antenna solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
The Spitfire Series of antennas delivers exceptional performance with its dipole design, ground plane independence, and easy wall-mount versatility for both indoor and outdoor environments.
Read more...SMD antenna for GNSS L1 band CST Electronics
Telecoms, Datacoms, Wireless, IoT
Antenova has recently launched the Admotus SMD antenna, a ceramic antenna suitable for all GNSS positioning applications in the L1 band covering 1559 to 1609 MHz.
Read more...High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
printer friendly version