Transponders in different frequency ranges are used in a variety of applications and technical sectors. Neosid offers RFID transponders and antenna devices for the following frequency ranges:
• LF - low frequency, 125/134,2 kHz.
• HF - high frequency/near-field communication (NFC), 13,56 MHz.
• UHF - ultra high frequency, 434/868/9xx MHz.
With NeoTAG, Neosid offers an extremely compact design that meets maximum range. The highly compact transponders withstand the most adverse conditions and have a remarkable reading range, even from within metallic environments.
A cleverly designed ferrite core optimises reading out from within a metallic environment at 13,56 MHz. The transponder is delivered with a read/write chip as standard and supplied in a surprisingly small housing (2,6 x 2,6 x 2,4 mm). That qualifies the compact NeoTAG components for a broad range of tasks that encompasses all industries in which small transponders with a far reading range are in demand.
The assembled RFID chip supports ISO IEC 15693 and as NFC Forum Type 5 tags, they are useable for NFC applications as well. NeoTAG HF transponders are in accordance with the directive for market availability of radio equipment (RED directive 2014/53/EU).
The plastic housing for these ‘plug-and-flag’ products is made from high-quality polyphthalamide (PPA) material. This thermoplastic synthetic material possesses high strength and demonstrates high resistance to mechanical loads, chemical substances and heat. Its high creep strength and low mechanical distortion make PPA a very popular material for use in demanding industries. Due to this PPA material’s high temperature stability of up to 280°C, NeoTAG transponders withstand use in high ambient temperatures.
For all supported RFID frequency ranges, Neosid offers a wide range of specially fitted transponder antennas that can be used in transponders as well as in RFID reader devices.
Wi-Fi 6/BLE module enables rapid development Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the WE310K6, a fully integrated, low-power module featuring dual-band, dual-stream Wi-Fi 6, and dual-mode Bluetooth/BLE.
Read more...Low phase noise amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The MAAL-011158 from Macom is an easy-to-use low-phase noise amplifier that provides 12 dB of gain in a 32-lead QFN plastic package.
Read more...Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
printer friendly version