onsemi unveiled a new system solution that overcomes the main challenges associated with developing asset tracking tags. Battery life has been a major obstacle to asset tag adoption, particularly within industrial sectors where reducing maintenance efforts and associated costs are a primary concern. The RSL10 Asset Tag offers a battery life of up to five years, compared to the generally accepted battery life for asset tracking tags or beacons of just a year or even months.
This battery life is made possible by the low power consumption of the RSL10 Bluetooth 5 radio SoC and enhancements at the firmware level. Alongside the RSL10, the platform features a 3-axis accelerometer and environmental sensors (motion, pressure and temperature) to provide valuable data and insights into an asset’s environment, condition and orientation.
Each sensor is powered through a dedicated MOSFET load switch controlled by the RSL10. This design enables the overall system power consumption to be controlled on a per-sensor basis, which decreases the total power used. Additional features of the platform include a low-cost antenna, matching circuit optimised for Bluetooth Low Energy (BLE) transmissions, a multi-purpose dome switch and a 10-pin debugger that can be removed depending on the needs of the application.
The RSL10 was recently selected for use in an indoor localisation beacon designed to track and monitor hospital equipment and provide actionable insight to healthcare providers. Blyott, an IoT solution provider and Tatwah, a market leader in Bluetooth LE tags and beacons, developed the device. Blyott selected Tatwah’s RSL10-based beacons because of their small form-factor, ultra-low-power capabilities and the ability of the IP67 tags to meet the stringent sterilisation requirements.
The RSL10 Asset Tag is available with a comprehensive suite of development tools that include multi-protocol wireless support for Bluetooth Low Energy connectivity and the Quuppa Intelligent Locating System real-time localisation services (RTLS). Within the CMSIS-Pack which is included with the evaluation board, onsemi has developed a custom application that demonstrates the ultra-low-power features and capabilities of the platform in an asset tracking use-case.
Wi-Fi 6 and Bluetooth LE co-processor Altron Arrow
Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.
Read more...Improving accuracy of outdoor devices iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
In a real-world environment, accessing a direct satellite signal is not always possible, and it cannot be relied upon as the only solution to provide a device with accurate location at all times.
Read more...New 3dB hybrid couplers Electrocomp
Telecoms, Datacoms, Wireless, IoT
Designed to facilitate the continued evolution of high-frequency wireless systems in various market segments, the new DB0402 3dB 90° hybrid couplers provide repeatable high-frequency performance compatible with automated assembly.
Read more...Next-level Software Defined Radio IOT Electronics
Telecoms, Datacoms, Wireless, IoT
Great Scott Gadgets has announced the HackRF Pro, a powerful evolution of its popular Software Defined Radio (SDR) platform designed for engineers and enthusiasts.
Read more...High-performance Zigbee and BLE module iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
The KCMA32S from Quectel boasts an ARM Cortex-M33 processor with a frequency of up to 80 MHz, and supports Zigbee 3.0, BLE 5.3 and BLE mesh.
Read more...Championing local PCB manufacturing Master Circuits
Telecoms, Datacoms, Wireless, IoT
Master Circuits, founded in 1994 by Peter Frankish in Durban, was born from the vision to meet the growing local demand for quick-turnaround printed circuit boards in South Africa.
Read more...IoT-optimised LTE Cat 1 bis module iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel’s EG915K-EU is an LTE Cat 1 bis wireless communication module specially designed for M2M and IoT applications.
Read more...Chip provides concurrent dual connectivity EBV Electrolink
Telecoms, Datacoms, Wireless, IoT
The IW693 from NXP is a 2x2 dual-band, highly integrated device that provides concurrent dual Wi-Fi 6E + Wi-Fi 6 and Bluetooth connectivity, supporting four different modes.
Read more...The 6 GHz band radio solution Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Analog Devices’ 16 nm transceiver family offers a highly integrated solution for this new frequency band, featuring low power consumption and high performance.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version