Infineon’s MOTIX IMD700A and IMD701A are the latest fully programmable motor controllers which integrate the XMC1404 microcontroller with the MOTIX 6EDL7141 three-phase gate driver IC. This combined package enables the development of next-generation battery-operated products using brushless DC (BLDC) or permanent magnet synchronous (PMSM) motors.
The XMC1404 ARM Cortex-M0 based microcontroller incorporates dedicated features to improve motor drives control. A hardware math co-processor clocked at
96 MHz enhances calculations including division and trigonometric functions commonly used in field-oriented control of PMSM. Additionally, XMC1404 inherits most of the high-end peripherals found in the XMC4000 family including PWM timers, position interface and serial communication modules including CAN.
The integrated three-phase gate driver (6EDL7141) is also designed for maximum flexibility. With configurable gate drive sink and source currents up to 1,5 A, it can drive a wide range of MOSFETs effectively to minimise losses and increase efficiency. It has adjustable gate driver supply voltage setting between 7, 10, 12 and 15 V even when the battery voltage is low, thanks to built-in high and low side charge pumps.
Besides the microcontroller and gate driver, a precision power supply as well as current shunt amplifiers are also included in the integrated package, making much of the peripheral circuitry no longer necessary. This allows a reduction in PCB space, increased power density and improved packaging possibilities.
Target applications for these new motor controllers include professional cordless power tools, electric gardening products, e-bikes and automated guided vehicles.
Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...Cost-effective microcontroller series Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...Understanding two key tools for cleaner serial data Altron Arrow
Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...Ultra-low jitter clocks Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Skyworks has introduced a new family of ultra-low jitter programmable clocks designed to meet the increasing demands of next-gen connectivity.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version