Telecoms, Datacoms, Wireless, IoT


Industrial smart sensor kit

23 November 2022 Telecoms, Datacoms, Wireless, IoT

The STEVAL-IOD04KT1 from STMicroelectronics is a reference design kit that exploits the features of the L6364W IO-Link dual-channel device transceiver. The kit consists of the STEVAL-IOD004V1 main board, the STLINK-V3MINI programmer and debugger tool, a 14-pin flat cable, and an M8 to M12 standard industrial connector adaptor.

The kit acts as a modern smart industrial sensor to be connected to a master IO-Link hub, or any other suitable PLC interface. The power supply for the MCU, sensors, and other logic devices, is sourced from the DC-DC converter controller embedded in the L6364W.

The on-board STM32G071EB microcontroller runs an IO-Link demo stack v.1.1, which controls the IO-Link communication, and the software code that manages the L6364W transceiver and the MEMS industrial sensors.

The tiny dimensions of the main board have been achieved thanks to the small sizes of the CSP package options of L6364W and STM32G071EB.

The main board can be connected to an IO-Link master via the adapter and the M8 connector which is included in the kit for normal operation. The same board can be connected to the STLINK-V3MINI through the flat cable only for programming the STM32G071EB with new firmware.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Quectel increases its IoT antenna range
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel has expanded its IoT antenna portfolio with six new 4G and 5G antennas that cover a wide range of use cases.

Read more...
Webinar: Game-changing Matter standard
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
Join Infineon for an exclusive one-hour webinar with EBV Elektronik, exploring the groundbreaking Matter standard, and its profound implications for the future of smart homes.

Read more...
Wi-Fi 6/BLE module enables rapid development
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the WE310K6, a fully integrated, low-power module featuring dual-band, dual-stream Wi-Fi 6, and dual-mode Bluetooth/BLE.

Read more...
Low phase noise amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The MAAL-011158 from Macom is an easy-to-use low-phase noise amplifier that provides 12 dB of gain in a 32-lead QFN plastic package.

Read more...
Webinar: Enabling the digital transformation of IIoT with Bluetooth
Telecoms, Datacoms, Wireless, IoT
Key industrial use cases for Bluetooth will be reviewed, including the main performance requirements for Bluetooth in industrial applications, and the technical features available.

Read more...
Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
Long-range Wi-Fi HaLow module
TRX Electronics Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.

Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.

Read more...
SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...