Telecoms, Datacoms, Wireless, IoT


High-isolation RF switch optimised for broadband cable

31 August 2026 Telecoms, Datacoms, Wireless, IoT

pSemi has announced the PE42727 UltraCMOS SPDT RF Switch, a high-isolation solution optimised for next generation broadband cable applications.

The PE42727 is a HaRP technology enhanced SPDT RF switch designed for cable broadband applications operating from 5 MHz to 3,1 GHz. Engineered to meet DOCSIS 4.0 requirements, the PE42727 delivers high surge protection, best in class linearity, exceptional harmonic performance, low insertion loss, and high isolation, supporting advanced modulation schemes in modern cable networks.

Key product benefits of the PE42727 include:

• Support for DOCSIS 3.0, 3.1, and 4.0 systems, enabling flexible broadband architectures for cable modems, set top boxes, residential gateways and cable broadband infrastructure

• Exceptional harmonics: 2fo: -121 dBc @ 17 MHz, 3fo: -140 dBc @ 17 MHz

• Low insertion loss of 16 dB at 85 MHz and 0,55 dB at 1794 MHz

• High isolation of 64 dB at 85 MHz and 30 dB at 1794 MHz

• Built on UltraCMOS process technology, delivering GaAs like RF performance with CMOS levels of integration and manufacturability




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Introducing Aurata
CST Electronics Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.

Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.

Read more...
Quectel expands 5G portfolio
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.

Read more...
Compact RTK design: More than just the receiver
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.

Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.

Read more...
Channel emulator for 6 G and Wi-Fi 7/8
Concilium Technologies Telecoms, Datacoms, Wireless, IoT
With 400 MHz instantaneous bandwidth and support for carrier frequencies up to 23,6 GHz, Vertex 6.0 is the industry’s first channel emulator designed for next generation 6 G and Wi-Fi 7/8 testing.

Read more...
Secure, low-power Bluetooth LE SoC
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
Silicon Labs unveils BG2B, its lowest-power Bluetooth LE SoC with industry-leading power efficiency, security, and integration.

Read more...
NeoMesh using LoRa modulation as its physical layer
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has released a new white paper about NeoMesh using LoRa modulation as its physical layer.

Read more...
The signal-to-noise challenge in large-scale IIoT
Sigfox South Africa Editor's Choice Telecoms, Datacoms, Wireless, IoT
For much of the last decade, the industrial IoT industry has been driven by a relatively simple assumption: if a little data is useful, more data must be better. That thinking shaped countless deployments.

Read more...
Simplifying RS485 network design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Aipu Power has added the RS485-XXXSAV to its transceiver module range, a single-channel isolated RS485 transceiver that bundles power isolation, signal isolation, RS485 interface and bus protection into one drop-in module, aimed at simplifying RS485 network design in industrial equipment.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved