Telecoms, Datacoms, Wireless, IoT


Cross-polarised 4G/5G omnidirectional antenna

28 July 2021 Telecoms, Datacoms, Wireless, IoT

The TGX.45.A.BI.01 from Taoglas is a cross-polarised omnidirectional antenna that operates in sub-6 GHz cellular bands from 450 to 6000 MHz. It consists of two dipole antennas that are orthogonally positioned with each other to efficiently receive ±45° polarised signals that are broadcast by most base stations. This also enhances its throughput capacity to provide good efficiency and gain for 5G/4G cellular communications. The cross-polarised antennas’ layout also enhances MIMO performance capabilities, thus improving signal quality.

The antenna has been developed to operate in 5G NR bands between 3300 and 4200 MHz and also covers Band 31 (450 MHz) and Band 71 (617 MHz) at the lower end of the 5G/4G frequency spectrum. It is available in an IP65-rated enclosure with multiple mounting options that include wall/pole or glass mounting that can be done using suction cups from Taoglas.

The TGX.45.A.BI.01 is available with a CFD-200 cable (customisable length) and an SMA male connector. It is ideal for 4x4 MIMO applications that include gateways, routers and wireless access points.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Simplifying system design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The FGMC63N tri-band MCU Wi-Fi 6E module from Quectel addresses offers integrated connectivity across 2,4 GHz, 5 GHz, and 6 GHz bands in a compact, highly optimised design.

Read more...
Dragino’s connectivity catalogue
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Where Wi-Fi demands frequent charging and covers tens of meters, and traditional cellular consumes too much power for battery-operated nodes, LoRaWAN threads the needle.

Read more...
RF filters explained
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
As RF environments become increasingly crowded, RF filters play a critical role in maintaining signal quality, improving system performance, and ensuring reliable operation.

Read more...
Practical design strategies for 5G
RF Design Telecoms, Datacoms, Wireless, IoT
The Cavli CQM211 aims to provide a platform that combines strong 5G connectivity with onboard compute capability, as well as interface flexibility that suits both new designs and rapid migrations from earlier products.

Read more...
GigaDevice expands optical communication portfolio
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
GigaDevice has introduced the new GD32E512 and GD32E252 series MCUs specifically designed for optical module applications.

Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.

Read more...
An industry-first Android 16 smart module solution
RF Design Computer/Embedded Technology Telecoms, Datacoms, Wireless, IoT
The MeiG Smart SLM580 4G Smart Module features native support for Android 16 and covers core frequency bands in major countries and regions worldwide.

Read more...
High performance RF signal conditioning
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The AM3269 from Mercury Systems is a high-performance RF preselector module designed to improve receiver sensitivity and signal integrity in demanding electronic warfare, signals intelligence, test, and communications applications.

Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.

Read more...
RF filters explained
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
As RF environments become increasingly crowded, RF filters play a critical role in maintaining signal quality, improving system performance, and ensuring reliable operation.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved