Editor's Choice


From the editor's desk: Marvelling at the simple things

31 May 2023 Editor's Choice


Peter Howells, Editor

Last month I had the opportunity to go away for a long weekend into the Gwahumbe Valley in Kwazulu-Natal. By midday on Friday, the car had been packed and we set off.

With prior knowledge of where we were going, I had packed accordingly: an axe, a gas lighter, and a portable power supply unit was tucked away in the boot of the car. I knew what to expect.

After an hour of driving, we passed a signpost that read ‘Cell phone comms ends here,’ and we hit a rough 4x4 dirt track for another 30 minutes down into a valley that only has one way in and one way out. Surrounded by cliffs that were becoming higher and steeper as we slowly drove on, I marvelled once again at the small screen on the dashboard showing not only my exact position on the track, but also where I needed to be headed. The marvellous part was that even though we had absolutely no cell phone reception for either calls or data, the GNSS unit still worked flawlessly, receiving the signal from its multiple satellites orbiting us.

You may wonder why this system intrigued me. After all, consumer GPS receivers have been around for the better part of 20+ years. Well, to be driving in an area with steep canyon walls would have rendered a typical GPS receiver useless fifteen years ago. The dreaded ‘signal lost’ message would have been displayed and nothing else on the unit would have worked after that.

Roll on 15 years and we now have GNSS chipsets embedded in navigational systems that can receive signals from multiple constellations, and they work like a dream. The GNSS unit I was using was a Quectel L76 receiver talking via UART to an ESP32 microcontroller which was connected to a 5-inch touchscreen display (I know these details as I had designed, built and programmed the system myself during a rare day of downtime).

The L76 being used has 99 acquisition channels and can track 33 concurrent channels, supporting four different constellations. Even in the dense valley we found ourselves in, I was still locked onto and receiving the signal from a minimum of eight satellites, more than enough to calculate an accurate position. This would not have been possible years ago when these extra constellations did not exist. The circular indicator on the previously recorded track was rock steady and after 30 minutes of bumping around, we reached the destination in the valley.

The small camp’s lighting is entirely powered by 12 V. Hence, the addition of the portable power supply in the boot. With everything else running on gas, we enjoyed a peaceful sojourn, recharging our ‘biological batteries’.

Wireless communication systems are a wonderful modern invention, but the fact is they do not reach everywhere yet. Satellite signals do, however, and I, for one, am excited at the prospect of future phones being able to receive a satellite signal for communication.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Solving South African power problems with locally built intelligence
Editor's Choice Power Electronics / Power Management
Smart metering infrastructure in South Africa remains patchy. The rollout has been slow, coverage is inconsistent, and for the most part, granular per-unit measurement simply does not exist.

Read more...
From the editor's desk: The art of measuring the truth
Technews Publishing Editor's Choice News
All electronic measurements are a lie. The trick is making the lie as small as possible.

Read more...
Engineering for failure: why resilient telemetry matters more than perfect connectivity
Editor's Choice Telecoms, Datacoms, Wireless, IoT
One of the biggest assumptions in modern tracking systems is that connectivity will always be available. From an engineering perspective, this creates an interesting problem.

Read more...
Lesley Havenga: Building partnerships for Africa’s electronics future
Editor's Choice News
As Würth Electronik expands its footprint across South Africa and the broader sub-Saharan region, Havenga’s blend of manufacturing expertise, supply chain knowledge, and people-centred leadership appears well suited to the task.

Read more...
Generating negative voltages from a positive supply
Altron Arrow Editor's Choice Passive Components
It is common for IoT devices, industrial sensors, meters, and medical equipment to require both a positive and negative voltage, and this article explains the options available to produce a negative rail from a positive rail supply.

Read more...
PEAK’s first automotive Ethernet solution
Industrial Data Xchange (IDX) Editor's Choice Telecoms, Datacoms, Wireless, IoT
The PAE-Media Converter is a robust and compact device designed to connect Automotive Ethernet (100BASE-T1 or 1000BASE-T1) with standard Ethernet (100BASE-TX or 1000BASE-T) networks.

Read more...
EMC limits and levels
Altron Arrow Editor's Choice Circuit & System Protection
As soon as electronics and electrical systems started interfering with each other, the world had to come to some consensus. Considering physics is universal and does not care about what country electrical/electronic products are used in, it should be the same everywhere, right? It is nearly there, but not quite.

Read more...
Sigfox SA powers smart connectivity
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Sigfox South Africa is carving out a unique role, delivering low-power, wide-area network connectivity designed specifically for Internet of Things applications.

Read more...
Seeing through the noise
RF Design Editor's Choice Telecoms, Datacoms, Wireless, IoT
How Adaptive Long Coherent Integration (ALCI) delivers superior measurement and positioning performance where conventional receivers fall short.

Read more...
Case Study: Turning data into insight
Hamamatsu Photonics UK Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved