|
|
Broadband MMIC switches
16 May 2018, Telecoms, Datacoms, Wireless, IoT
Custom MMIC continues to add to its extensive family of MMIC (monolithic microwave integrated circuit) switches with two new GaAs devices – the non-reflective CMD235C4 and CMD236C4.
The CMD235C4 is a DC-18 GHz broadband MMIC SP5T switch offering broadband performance with an insertion loss of 2,5 dB and high port-to-port isolation of 40 dB at 10 GHz. The CMD236C4 covers DC to 18 GHz and offers a low insertion loss of 2,5 dB and high isolation of 42 dB at 10 GHz.
Ideally suited for high-performance military and instrumentation applications, both switches provide a switching speed of approximately 60 ns and an input P1dB of 21 dBm. These switches feature binary decoder circuitry that reduces the number of logic control lines, and their control voltages are 0 / -5 V. Both MMICs are housed in a ROHS compliant 4 x 4 mm QFN surface mount package. For more information contact Andrew Hutton, RF Design, +27 (0)21 555 8400, andrew@rfdesign.co.za, www.rfdesign.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- The ultimate wireless mesh for Industrial IoT in SA?
29 May 2019, Altron Arrow, This Week's Editor's Pick, Telecoms, Datacoms, Wireless, IoT
Analog Devices’ SmartMesh could help with predictive maintenance of the largely metal and concrete buildings which include industrial plants, data centres, commercial buildings, bridges and tunnels.
- Passive RFID using UHF delivers long-range benefits in the IoT
29 May 2019, Avnet South Africa, This Week's Editor's Pick, Telecoms, Datacoms, Wireless, IoT
In order to support the use of UHF RFID as an IoT solution, a global alliance was formed in 2014 by Google, Intel, Impinj, Smartrac and AIM.
- To ICASA or not to ICASA wireless modules?
29 May 2019, Otto Wireless, This Week's Editor's Pick, Telecoms, Datacoms, Wireless, IoT
When selecting a wireless module, purchasing an ICASA approved device or module from the approved supplier is critical.
- Using a COTS-based SDR platform for streamlined 5G development
29 May 2019, Rugged Interconnect Technologies, This Week's Editor's Pick, Telecoms, Datacoms, Wireless, IoT
The latest SDR products offer solutions with integrated I/O, ARM processors, and large FPGAs that include intellectual property (IP) for accessing, routing and processing digital data.
- Waveguide antennas for millimetre-wave
29 May 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Pasternack has released a new line of waveguide antennas designed to address R&D, military/aerospace, experimental radar, test and measurement, and wireless communication applications from 40 GHz to 220 ...
- Multi-constellation GNSS module
29 May 2019, Altron Arrow, Telecoms, Datacoms, Wireless, IoT
Telit’s new GE310-GNSS is an IoT (Internet of Things) module with GSM/GPRS, multi-constellation satellite positioning and Bluetooth functionality, packaged in a 270 mm² form factor.
The module enables ...
- RF front-ends for 5G deployments
29 May 2019, Hi-Q Electronics, Telecoms, Datacoms, Wireless, IoT
Sky5 LiTE, recently unveiled by Skyworks, is a fully integrated front-end solution for mass tier 5G cellular applications. The baseband agnostic platform supports up to 100 MHz bandwidth for 5G new radio ...
- GNSS module for lane-accurate positioning
29 May 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
New from u-blox comes the ZED F9K high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
- Wi-Fi and Bluetooth module
29 May 2019, Avnet South Africa, Telecoms, Datacoms, Wireless, IoT
Murata Manufacturing has collaborated with Cypress Semiconductor to develop the Type 1LV (CYW43012) low-power, small form factor Wi-Fi and Bluetooth module. This product is designed to improve battery ...
- Sigfox-connected remote switch
29 May 2019, Electrocomp Express, Telecoms, Datacoms, Wireless, IoT
Telemecanique Sensors offers a wireless solution to collect data from remote equipment and use this data, via the Internet, on a PC or mobile device. The XIOT cloud-connected switch (model XIOT11SE5MRCL) ...
- Replacing the magnetron with solid-state devices in microwave ovens
29 May 2019, TRX Electronics, Telecoms, Datacoms, Wireless, IoT
Microwave ovens are much-used appliances in many kitchens today. Used not only for cooking food from frozen but also for reheating last night’s curry or the cup of coffee you left to go cold, they provide ...
- 50 GHz mixers in SMT packages
29 May 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Marki Microwave has introduced its first 50 GHz surface-mount products, the MM1-1850HSM and MM1-1850SSM double-balanced mixers. These GaAs MMIC mixers offer wide bandwidths and high linearity in a proprietary ...
|
|
