mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Development kit for wireless power transfer
30 January 2019, Telecoms, Datacoms, Wireless, IoT

Würth Elektronik eiSos and Infineon Technologies have jointly brought a development system for wireless power transfer to market. The kit serves to develop applications outside the Qi standard up to a power of 200 W.

Data can also be transmitted via transmitter and receiver coil, as well as receiver sending data to the transmit coil. A manual is available online and explains the innovative method of modulating the alternating field between transmitter and receiver. Options include sensors and a display board to test scenarios for data acquisition, forwarding and display.

Possible fields of application include Industry 4.0, IoT or medical technology, for instance. Wherever there are harsh environments with any cable and connector openings in enclosures which should be avoided, such as in the case of wireless battery charging, it may be expedient to convey status messages.

The 760308EMP-WPT-200W development kit includes a power supply unit, a transmitter and a receiver unit. The transmitter side consists of a full bridge and a resonance circuit. This is formed from the series connection of the WPT coil and the resonance capacitors. As a result of the phase shift between the voltage and current in the resonance circuit, the system works in ZVS (zero voltage switching) mode. This leads to a very high efficiency of the overall system.

A synchronous rectifier is used on the receiver side with downstream filtering and screening. In addition, amplitude modulation (AM) of the alternating field between the transmitter and receiver allows any data to be sent from the receiver side to the transmitter side.

An application example that can be simulated with sensors at the I²C interface of the receiver board, is a mobile device that sends data to a base-station while charging. All data and documentation necessary to realise a proprietary system of this kind are freely available for download.

For more information contact Jason Page, Würth Elektronik eiSos, +27 71 259 9381, jason.page@we-online.com, www.we-online.com


Credit(s)
Supplied By: Würth Elektronik eiSos
Tel:
Fax:
Email: jason.page@we-online.com
www: www.we-online.com
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • RGB LEDs for decorative lighting
    26 June 2019, Würth Elektronik eiSos, Opto-Electronics
    Würth Elektronik’s new WL-SFTW and WL-SFTD series of RGB LEDs are targeted at accent and decorative lighting, optical displays as well as industrial applications. Thanks to their PLCC contacting design, ...
  • Bluetooth LE pass-through module
    26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
    The HM-BT4501 from HopeRF is a wireless data pass-through module based on a CMT4501 low-power Bluetooth 5.0 chip. By connecting with a microcontroller, it can be used to realise a connection and data ...
  • Positioning module for autonomous driving
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The ZED-F9K from u-blox is a high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
  • Automotive smart hub ICs
    26 June 2019, Avnet South Africa, Telecoms, Datacoms, Wireless, IoT
    Microchip Technology has added new single-port USB smart hub ICs to its family of USB automotive products. The USB4912 and the USB4712 can be used to add a single port under the radio, in the centre console ...
  • Wideband amplifier for instrumentation
    26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
    MACOM Technology Solutions announced a new wideband distributed amplifier with the introduction of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
  • Positioning and cellular antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The Tycho MA310 antenna is a combination, small form factor GPS/GLONASS and penta-band cellular (GSM/GPRS/CDMA/ PCS/DCS/ WCDMA/UMTS) antenna to simplify AVL or fleet management antenna systems worldwide. Made ...
  • RF power doubler
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The QPA3357 from Qorvo is a power doubler that operates from 47 to 1218 MHz. It provides an output power of 57 dBm, a gain of 28 dB, and has a noise figure of 4,5 dB. This power doubler is matched to ...
  • Ka-band power amplifier
    26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
    MACOM Technology Solutions’ new MAAP-011250 is a balanced 4 W power amplifier (PA) operating from 27,5 – 30 GHz, making it well suited for SATCOM and VSAT applications. With the addition of this new ...
  • Flexible wideband antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The Taoglas FXUB64.18.0150C flexible wideband antenna has been designed to cover all working frequencies in the 600-3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM, NB-IoT, CAT-M1 and A-GPS ...
  • High-frequency power dividers
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    Pasternack has launched a new series of high-frequency power dividers targeted at 5G cellular communication, automotive radar and satellite communication applications. The lineup consists of 17 new ...
  • Cellular module for LPWA applications
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    u-blox has announced the SARA R5 series of LTE M and NB-IoT modules for low power wide area (LPWA) IoT applications. The module, built on the UBX R5 cellular chipset and the M8 GNSS receiver chip, is ...
  • Hinged 4G LTE antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The hinged Apex II TG.35 wideband dipole antenna from Taoglas has been designed to cover all cellular, ISM and Wi-Fi working frequencies in the 600-6000 MHz spectrum. It has been primarily designed for ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.