|
|
Sigfox-connected remote switch
29 May 2019, Telecoms, Datacoms, Wireless, IoT
Telemecanique Sensors offers a wireless solution to collect data from remote equipment and use this data, via the Internet, on a PC or mobile device. The XIOT cloud-connected switch (model XIOT11SE5MRCL) is based on LPWAN (low-power wide-area network) technology, operated by Sigfox.
The rugged, standalone device uses antennas with a range of around 50 km and can operate for up to 10 years. When the contacts on a switch installed on a site change state, the transmitter sends a message to the IoT network, which is then routed to secure servers. This message is then delivered to one or more recipients as an alert on PC, tablet or smartphone.
Targeted applications include areas without electricity or which are difficult to access, such as agriculture, mining, oil and gas, and utilities.
For more information contact Electrocomp Express, 0860 10 20 20, sales@eexpress.co.za, www.eexpress.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Low phase-noise amplifier
31 July 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
Available in 2,8 x 1,73 x 0,1 mm bare-die and 5 x 5 mm, 32-lead AQFN packaged formats, MACOM Technology Solutions’ MAAL-011151 is well suited for use as a low phase-noise amplifier stage for signal generation ...
- Wideband digital attenuator
31 July 2019, Telecoms, Datacoms, Wireless, IoT
The CMD280 from Custom MMIC is a wideband 5-bit digital attenuator that operates from DC to 30 GHz (covering the L, S, C, X, Ku, K and Ka bands). Each bit of this GaAs MMIC attenuator is controlled by ...
- Double-balanced X-band mixer
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The MM1-0832LSM is a double-balanced mixer from Marki Microwave with an RF/LO frequency from 8 to 32 GHz and an IF frequency from DC to 12 GHz. This high-frequency X-band GaAs MMIC mixer works well as ...
- Low-noise RF amplifier
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The CMD299 from Custom MMIC is a wideband GaAs MMIC low-noise amplifier that operates from 18 to 40 GHz. It provides an output power of up to 7,5 dBm (0,0056 W), a gain of 16 dB, and has a noise figure ...
- Wideband amp for instrumentation and communications
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions has rolled out a new wideband distributed amplifier in the form of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
- Wideband LTE antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Taoglas announced an addition to its successful Warrior series: the PA740.A antenna. With additional LTE bandwidth and new bands added for 5G functionality, the new antenna is an evolved design from the ...
- Mini programmable IoT module
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The EM510 is an ultra-compact Tibbo BASIC/C-programmable IoT module with a single UART, Ethernet, and optional Wi-Fi/BLE (Bluetooth Low Energy) connectivity. The module offers substantial performance ...
- Low-power IoT module in volume production
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Nordic Semiconductor’s nRF9160 system-in-package (SiP) – an LTE-M/NB-IoT and GPS cellular IoT module – has entered the final volume silicon production phase, having successfully passed a series of major ...
- External antenna for 868/915 MHz bands
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Shockwave TLS.90.205111 is a mechanically robust, waterproof, external antenna operating at 868 MHz and 915 MHz with 2 metres of low-loss TGC-200 cable and an SMA(M) connector. Manufactured by Taoglas, ...
- Double-balanced RF mixer
31 July 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
The MAMX-011035 from MACOM Technology Solutions is a GaAs double-balanced passive diode mixer housed in a lead-free 3 mm, 12-lead QFN package. The mixer offers low conversion loss, high linearity and ...
- Wi-Fi front-end module
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The QPF7219, made by Qorvo, is an integrated front-end module designed for Wi-Fi 6 (802.11ax) systems. It integrates a 2,4 GHz power amplifier (PA) with power detector, BAW filter, regulator, transmit-receive ...
- Broadband power amplifier
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The ADM3-0022PA from Marki Microwave has the gain and output power to produce 1 W of output power from a +0 dBm input power up to 22 GHz. It contains three broadband amplifier stages in series in a single ...
|
|
