Telecoms, Datacoms, Wireless, IoT


Flexible wideband antenna

26 June 2019 Telecoms, Datacoms, Wireless, IoT

The Taoglas FXUB64.18.0150C flexible wideband antenna has been designed to cover all working frequencies in the 600-3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM, NB-IoT, CAT-M1 and A-GPS requirements, including LTE band 71.

The antenna is delivered with a flexible body with high efficiencies on all bands. It is ground independent and supplied with cable and connector for easy installation. At 130 x 30 x 0,2 mm, the flexible polymer antenna is ultra-thin and truly is assembled by a simple ‘peel and stick’ process, attaching securely to non-metal surfaces via 3M adhesive. It enables designers to use only one antenna that covers all common LTE frequencies.

The FXUB64 has a peak gain of 6 dBi, an efficiency of more than 50% across the bands, and is designed to be mounted directly onto a plastic or glass cover. Cables and connectors are customisable. Like all such antennas, care should be taken to mount the antenna at least 10 mm from metal components or surfaces, and ideally 20 mm for best radiation efficiency.

For more information contact Andrew Hutton, RF Design, +27 21 555 8400, andrew@rfdesign.co.za, www.rfdesign.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

How are end-launch PCB connectors useful?
29 April 2020, RF Design , Interconnection
There has been an increasing use of RF coaxial connectors, especially microwave and millimetre-wave coaxial connectors, for high-speed digital and precision sensing applications, There is also a growing ...

Read more...
RF variable attenuators
29 April 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The AN7 Thermopad series from Smiths Interconnect are temperature variable chip attenuators that operate from DC to 6 GHz. The Thermopad is a totally passive absorptive microwave attenuator, which provides ...

Read more...
V2X made more accessible by new u-blox module
29 April 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
u-blox announced its latest contribution to vehicle-to-everything (V2X) technology: the VERA P3 V2X module. Based on the u-blox UBX P3 V2X chip, VERA P3 puts automotive OEMs, Tier 1s and manufacturers ...

Read more...
Bluetooth evaluation kit
29 April 2020, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
The Cypress CYW920719B2Q40EVB-01 evaluation kit enables users to evaluate and develop single-chip Bluetooth applications using the CYW20719, an ultra-low-power dual-mode Bluetooth 5.0 wireless MCU (microcontroller) ...

Read more...
Easy-to-use Wi-Fi module
29 April 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
The ESP-07S Wi-Fi module was developed by Ai-Thinker Technology. The core processor ESP8266 integrates the advanced Tensilica L106 ultra-low-power, 32-bit MCU (microcontroller) in a small package with ...

Read more...
X-band GaN power amplifier
29 May 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The QPA2611 from Qorvo is an X-band GaN power amplifier (PA) that operates from 8 to 12 GHz. It delivers more than 5 W of saturated output power with a large signal gain of 26 dB and PAE (power added ...

Read more...
Bluetooth and Wi-Fi combo module
29 May 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
FSC-BW121 is a Bluetooth and Wi-Fi combo RF module which supports both Bluetooth 4.2 dual mode and Wi-Fi 802.11 a/b/g/n/ac standards. It requires an external MCU (microcontroller) to execute a Bluetooth ...

Read more...
4G serial routers
29 May 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
The 4G serial server devices HF2421 and HF2421G provide protocol conversion between RS-232/RS-485/RS-422 interfaces and Ethernet/Wi-Fi and 3G/4G, which can meet the solution requirements for serial/network ...

Read more...
WLAN MIMO antenna with four ports
29 May 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The FXP.524 Venti antenna is a 4-in-1 MIMO, flexible PCB monopole type antenna. Made by Taoglas, the antenna has excellent efficiency and isolation performance for dual-band Wi-Fi applications. It has ...

Read more...
Out-of-the-box spoofing mitigation with Galileo’s OS-NMA service
29 May 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
Over the past two decades, satellite-based positioning has become an indispensable, everyday technology that we constantly rely on – often even without being aware of it. With the relentless expansion ...

Read more...