|
|
|
18 to 32 GHz amplifier
28 August 2019, Telecoms, Datacoms, Wireless, IoT
Mini-Circuits announced the release of the latest addition to its connectorised high frequency amplifier line: the ZVE-323LN-K+, 18-32 GHz range.
The ZVE-323LN-K+is a Class-A, three-stage, unconditionally stable amplifier providing flat gain over an extremely wide frequency range from 18 to 32 GHz. This model is capable of delivering up to 10 mW output power at P1dB with high output IP3 supporting a wide range of sensitive, high-dynamic-range receiver applications and many systems where high performance over wideband is needed.
The ZVE-323LN-K+ has a flat gain of 20 ±1,5 dB typically and still has an acceptable performance from 17 GHz. It operates on a +12 V supply and features built-in safety features including protection against reverse bias and immunity to accidental open or short loads for 2 minutes. The amplifier comes in a rugged, compact case with K-type (2,92 mm) connectors and an optional heatsink for efficient cooling.
The combination of low noise and high IP3 makes the ZVE-323LN-K+ ideal for use in low-noise receiver front ends (RFE) as it gives the user the advantages of sensitivity and two-tone IM performance at both ends of the dynamic range.
For more information contact Conical Technologies, +27 66 231 1900, daniel.haywood@conical.co.za, www.conical.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Free software for viewing S-parameters
28 August 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
At this year’s International Microwave Symposium in Boston, Massachusetts,pSemi (formerly Peregrine Semiconductor), announced it is offering the industry free beta software for viewing
S-parameters. ...
- What are metamaterials and how do they relate to antennas?
28 August 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Metamaterials are an increasingly researched topic, especially where it pertains to modern antenna structures. However, there is a lot of confusion about exactly what metamaterials are and how they are ...
- Li-Fi illuminates the way to higher data rates
28 August 2019, TRX Electronics, Telecoms, Datacoms, Wireless, IoT
Radio spectrum is a precious resource and it quickly gets filled up. It did not take long for users of Wi-Fi in urban areas to understand how interference from nearby routers would affect the communications ...
- Managing the IoT on an energy budget
28 August 2019, Altron Arrow, Telecoms, Datacoms, Wireless, IoT, DSP, Micros & Memory
Historically, users wanted MCUs because they could process data and solve problems faster than a human could. MCUs also help make products more convenient and consistent in behaviour. The microcontroller ...
- Accounting for PIM with distributed antenna installations
28 August 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Passive intermodulation (PIM) distortion is the result of discontinuities, metal-to-metal contact, and material properties that lead to nonlinear characteristics of typically linear passive transmission ...
- FiRa Consortium seeks to revive UWB
28 August 2019, Telecoms, Datacoms, Wireless, IoT
A new consortium has been launched in an effort to resurrect UWB (Ultra-Wideband) technology, which gradually faded into obscurity following its initial release due mainly to its inability to compete ...
- Project kickstarts SA’s use of TV white spaces
28 August 2019, Telecoms, Datacoms, Wireless, IoT
The US Trade and Development Agency (USTDA) has awarded a grant to support a project to help improve Internet access to rural areas of South Africa.
The grant, which focuses on facilitating export opportunities ...
- iCorp Technologies launches its new IoT slogan
28 August 2019, iCorp Technologies, Telecoms, Datacoms, Wireless, IoT
create |connect |communicate, iCorp Technologies’ new slogan, was launched on 1 August 2019.
This comes as a very deliberate progression from the company’s previous slogan, ‘inspire| innovate | implement,’ ...
- Connectorised RF amplifier and filter modules
28 August 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
Atlanta Micro has launched a new line of connectorised modules for some of its most popular parts. These modules are made of aluminium and offer RF shielding along with field-replaceable SMA connectors ...
- High-frequency RF couplers
28 August 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Pasternack has launched a new series of high-frequency couplers that are ideal for 5G telecommunication, automotive radars, satellite communication, point-to-point radios and aerospace applications.
The ...
- GNSS boards for dead-reckoning
28 August 2019, Electrocomp, Telecoms, Datacoms, Wireless, IoT
The Locosys RTK-4671-SHDR/MHDR is a high-precision GNSS RTK (global navigation satellite system real-time kinematics) solution targeting the smart driving and lane-level navigation markets.
The newly ...
- Standalone multi-radio modules
28 August 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The NINA-W10 series from u-blox comprises standalone multi-radio 2,4 GHz MCU (microcontroller) modules that support Wi-Fi 802.11b/g/n and Bluetooth v4.2 (Bluetooth BR/EDR and Bluetooth low energy) communications. ...
|
|
