USBwiz is a small integrated circuit that allows users to add USB connectivity (keyboard, mouse, joystick, printer etc) to a system very easily. Ghi Electronics' USBwiz also includes the FAT file system so you can run USB thumb drives and external USB (FAT formatted) hard drives. Also, being TCP/IP aware, it can be used to connect a product to the Internet (or LAN) through wires or wirelessly. No USB knowledge is necessary as the device is plug-and-play. Through simple commands over UART SPI or I²C (similar to ALFAT), files can be read/written from a thumb drive or SD/MMC card. Accessing USB human interface devices (HID) and USB printers is also said to be simple. It can be used with any microcontroller including for example, PIC, AVR, and Basic Stamp. The UART runs as high as 921,6 K-baud, SPI clock is up to 7 MHz and I²C clock up to 400 kHz. Firmware is field upgradeable. It is packaged in LQFP 64 and very few external components are needed. The 3,3 V device with 5 V tolerant I/O pins, draws 40 to 50 mA and can operate over -40 to 85°C temperatures.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...18 W monolithic microwave amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
printer friendly version