Telecoms, Datacoms, Wireless, IoT


Serialiser ideal for ultra-compact systems

23 January 2008 Telecoms, Datacoms, Wireless, IoT

Maxim's MAX9235 serialiser, coupled with the MAX9206 deserialiser, presents a proven solution for camera interfaces (up to 400 Mbps) in small form-factor applications.

Offered in a 3 mm x 3 mm x 0,8 mm, 16-pin TQFN package that has a 0,5 mm contact pitch, it is said to be the industry's smallest 10:1 serialiser - 88% smaller than the previous 28-pin SSOP solutions. The small size and wide -40°C to +105°C operating temperature range make it suitable for the ultra-compact cameras used in production line monitoring, security and automotive applications. The MAX9235 serialises 10 bits of LVTTL/LVCMOS data into a single LVDS serial data stream. The MAX9206 then deserialises that single LVDS serial input into 10 single-ended LVTTL/LVCMOS outputs. The clock is recovered from the data stream, eliminating the clock-to-data and data-to-data skew that exists in a parallel bus. The MAX9235 can lock to a parallel clock in a wide 16 MHz to 40 MHz range.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Wireless connectivity expanded
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.

Read more...
Integrated X-band radar front-end module
RF Design Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.

Read more...
Introducing Aurata
CST Electronics Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.

Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.

Read more...
Quectel expands 5G portfolio
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.

Read more...
Compact RTK design: More than just the receiver
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.

Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.

Read more...
Channel emulator for 6 G and Wi-Fi 7/8
Concilium Technologies Telecoms, Datacoms, Wireless, IoT
With 400 MHz instantaneous bandwidth and support for carrier frequencies up to 23,6 GHz, Vertex 6.0 is the industry’s first channel emulator designed for next generation 6 G and Wi-Fi 7/8 testing.

Read more...
Secure, low-power Bluetooth LE SoC
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
Silicon Labs unveils BG2B, its lowest-power Bluetooth LE SoC with industry-leading power efficiency, security, and integration.

Read more...
High-isolation RF switch optimised for broadband cable
Telecoms, Datacoms, Wireless, IoT
pSemi Corporation has announced the PE42727 UltraCMOS SPDT RF Switch, a high-isolation solution optimised for next generation broadband cable applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved