PCI Express switches
6 February 2008
Telecoms, Datacoms, Wireless, IoT
IDT has introduced four new PCI Express (PCIe) switching solutions optimised to address the I/O connectivity challenges faced in the volume and value server markets. The new PCIe Gen2 devices include 24-lane, 6-port; 24-lane, 3-port; 6-lane, 6-port; and 4-lane, 4-port options. Each of the new devices is available in a 19 mm flip chip BGA package with 1 mm ball spacing. The switches are fully compliant with the PCI-SIG PCIe base specification 2.0 and provide customers the option of doubling the throughput bandwidth of existing PCIe lanes to 5 Gigabits per second of data transfer or allowing a 50% reduction in the number of PCIe lanes and board traces necessary to support link throughput requirements, for a more cost effective design. Each of the devices has a dedicated evaluation and development kit for device testing and analysis, and system emulation.
Further reading:
Full sensor to cloud solution
CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...
Long-range Wi-Fi HaLow module
TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...
SIMCom’s A7673x series
Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.
Read more...
Long-range connectivity module
Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...
4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...
Antennas to meet all connectivity requirements
Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...
18 W monolithic microwave amplifier
RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
Read more...