Telecoms, Datacoms, Wireless, IoT


Analog baseband LSI for SDR

5 March 2008 Telecoms, Datacoms, Wireless, IoT

NEC Electronics has announced the development of a reconfigurable analog baseband LSI for software defined radio (SDR). The newly developed LSI is capable of filtering unnecessary signals in the frequency range of 400 kHz to 30 MHz, allowing it to simultaneously support multiple wireless standards for existing and future mobile system standards such as mobile phone, broadcasting and wireless LAN systems. Boasting a small chip area of 0,57 mm², the LSI can also change the type of filter depending on the wireless standard. Conventionally, it has been difficult to incorporate SDR into mobile equipment since the existing SDR technology relied upon selective switching of transceiver devices, which resulted in a large mounting area of existing chips for each wireless standard. One of the key building blocks for the novel SDR transceivers is an analog baseband that includes tuneable filters. The new slim, compact LSI has been achieved by development of a pulse-width controlled reconfigurable filter for changing filter type and/or bandwidth.

www.necel.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact, durable and wideband wireless performance
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The Taoglas Metal Stamped MPA Series of antennas is engineered to meet the growing demands of modern wireless devices that require high performance in increasingly compact form factors.

Read more...
Ultra-low-power SDR tuner
Telecoms, Datacoms, Wireless, IoT
CML Micro has announced the launch of the CMX918, an advanced, ultra-low-power, multi-mode Software-Defined Radio (SDR) tuner designed to significantly extend battery life in portable, embedded, and always-on radio applications.

Read more...
Multiprotocol wireless System-on-Chip
Telecoms, Datacoms, Wireless, IoT
The nRF54LM20B from Nordic Semiconductor is a multiprotocol wireless SoC designed for demanding designs in Bluetooth devices used in smart homes and industrial applications.

Read more...
What does Wi-Fi 7 mean for South African networks?
Telecoms, Datacoms, Wireless, IoT
With Wi-Fi 7 (802.11be), we are finally looking at a standard that was built, not just for more devices, but for the new way networks are used.

Read more...
Quectel introduces tri-band MCU Wi-Fi 6E module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Supporting operation across the 2,4 GHz, 5 GHz, and 6 GHz bands, the FGMC63N delivers true tri-band capability in a compact, integrated design.

Read more...
u-blox redefining what’s possible
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.

Read more...
Channel sounding on Bluetooth module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
The latest Bluetooth module from Panasonic Industry provides excellent performance and minimal power consumption.

Read more...
Multiprotocol SoC
RF Design Telecoms, Datacoms, Wireless, IoT
The nRF54LM20A from Nordic Semiconductor is a multiprotocol wireless System-on-Chip designed for demanding wireless Bluetooth designs.

Read more...
TDK launches DRIVE
Avnet Abacus Telecoms, Datacoms, Wireless, IoT
TDK launches DRIVE, a platform designed to unlock control-grade accuracy for advanced vehicle platforms without perception sensors.

Read more...
High-performance Wi-Fi and Bluetooth module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The FCU741R is a high-performance Wi-Fi 4 module launched by Quectel, supporting 2,4 and 5 GHz frequencies which can be used for WLAN connection.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved