|
|
|
New M2M open protocol
2 April 2008, Telecoms, Datacoms, Wireless, IoT
iWOW Connections recently announced the introduction of iWOW M2M Open Protocol (iMOP), an event-driven software engine that offers developers a simple way to automate the communication of data in machine-To-machine (M2M) applications. Embedded atop iWOW’s TR-800 GSM/GPRS modules, iMOP is designed to suit the requirements for applications such as remote monitoring, fleet management and asset tracking.
iMOP aims to replace programming efforts to trigger data sending with user-friendly configurations for wireless reporting, controlling and monitoring. This software stack eliminates the need for an external microcontroller to control data transmission; instead it relies on AT commands to invoke a basic response during predefined events. Profiles of these events and actions can be defined and edited over-the-air through SMS, TCP/IP, GPRS and CSD or directly via the serial port.
iMOP can be configured to send periodic reports, providing realtime information and enabling enterprise managers to make decisions that reduce risks and improve their business processes. An alert in the form of SMS or data packet (via TCP socket or CSD) is sent when a user-defined event occurs. iMOP also enables remote control by executing commands and queries from authenticated incoming SMS and TCP messages. For more information visit www.iwow.com.sg |
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Double-balanced X-band mixer
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The MM1-0832LSM is a double-balanced mixer from Marki Microwave with an RF/LO frequency from 8 to 32 GHz and an IF frequency from DC to 12 GHz. This high-frequency X-band GaAs MMIC mixer works well as ...
- Low-noise RF amplifier
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The CMD299 from Custom MMIC is a wideband GaAs MMIC low-noise amplifier that operates from 18 to 40 GHz. It provides an output power of up to 7,5 dBm (0,0056 W), a gain of 16 dB, and has a noise figure ...
- Wideband amp for instrumentation and communications
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions has rolled out a new wideband distributed amplifier in the form of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
- Flexible wall-mount whip antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Cyclops WM.95 from Taoglas is a high-efficiency (over 50%) 915 MHz flexible whip antenna with a screw-mounted wall-mount L bracket. The radiation pattern is omnidirectional in the azimuth, allowing ...
- Bluetooth LE pass-through module
26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
The HM-BT4501 from HopeRF is a wireless data pass-through module based on a CMT4501 low-power Bluetooth 5.0 chip. By connecting with a microcontroller, it can be used to realise a connection and data ...
- Positioning module for autonomous driving
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The ZED-F9K from u-blox is a high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
- Automotive smart hub ICs
26 June 2019, Avnet South Africa, Telecoms, Datacoms, Wireless, IoT
Microchip Technology has added new single-port USB smart hub ICs to its family of USB automotive products. The USB4912 and the USB4712 can be used to add a single port under the radio, in the centre console ...
- Wideband amplifier for instrumentation
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions announced a new wideband distributed amplifier with the introduction of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
- Positioning and cellular antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Tycho MA310 antenna is a combination, small form factor GPS/GLONASS and penta-band cellular (GSM/GPRS/CDMA/ PCS/DCS/ WCDMA/UMTS) antenna to simplify AVL or fleet management antenna systems worldwide.
Made ...
- RF power doubler
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The QPA3357 from Qorvo is a power doubler that operates from 47 to 1218 MHz. It provides an output power of 57 dBm, a gain of 28 dB, and has a noise figure of 4,5 dB. This power doubler is matched to ...
- Ka-band power amplifier
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions’ new MAAP-011250 is a balanced 4 W power amplifier (PA) operating from 27,5 – 30 GHz, making it well suited for SATCOM and VSAT applications.
With the addition of this new ...
- Flexible wideband antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Taoglas FXUB64.18.0150C flexible wideband antenna has been designed to cover all working frequencies in the 600-3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM, NB-IoT, CAT-M1 and A-GPS ...
|
|
