Telecoms, Datacoms, Wireless, IoT


Ethernet to single-strand fibre-optic converter

14 May 2008 Telecoms, Datacoms, Wireless, IoT

Advantech's ADAM-6542 Ethernet to single-strand WDM fibre-optic converter adopts WDM technology that increases the information carrying capacity of fibre by multiplexing transmit and receive signals at different wavelengths.

The WDM technology is implemented in pairs: one site is installed with an ADAM-6542/W15 with a 1550 nm transmit channel and a 1310 nm receive channel. The other site is installed with an ADAM-6542/W13 with a 1310 nm transmit channel and a 1550 nm receive channel. This allows for both sites to transmit and receive channels on the single-strand fibre.

The modules support MDI/MDIX auto crossover and 1-port 100 Mbps single strand fibre-optics, and provide a 100Base-FX WDM single strand fibre. Easily mounted on a DIN-rail, panel or piggyback, they have an embedded switch controller that supports auto-negotiation and a memory buffer that supports store-and-forward transmission.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

RF variable attenuators
29 April 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The AN7 Thermopad series from Smiths Interconnect are temperature variable chip attenuators that operate from DC to 6 GHz. The Thermopad is a totally passive absorptive microwave attenuator, which provides ...

Read more...
V2X made more accessible by new u-blox module
29 April 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
u-blox announced its latest contribution to vehicle-to-everything (V2X) technology: the VERA P3 V2X module. Based on the u-blox UBX P3 V2X chip, VERA P3 puts automotive OEMs, Tier 1s and manufacturers ...

Read more...
Bluetooth evaluation kit
29 April 2020, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
The Cypress CYW920719B2Q40EVB-01 evaluation kit enables users to evaluate and develop single-chip Bluetooth applications using the CYW20719, an ultra-low-power dual-mode Bluetooth 5.0 wireless MCU (microcontroller) ...

Read more...
Easy-to-use Wi-Fi module
29 April 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
The ESP-07S Wi-Fi module was developed by Ai-Thinker Technology. The core processor ESP8266 integrates the advanced Tensilica L106 ultra-low-power, 32-bit MCU (microcontroller) in a small package with ...

Read more...
X-band GaN power amplifier
29 May 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The QPA2611 from Qorvo is an X-band GaN power amplifier (PA) that operates from 8 to 12 GHz. It delivers more than 5 W of saturated output power with a large signal gain of 26 dB and PAE (power added ...

Read more...
Bluetooth and Wi-Fi combo module
29 May 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
FSC-BW121 is a Bluetooth and Wi-Fi combo RF module which supports both Bluetooth 4.2 dual mode and Wi-Fi 802.11 a/b/g/n/ac standards. It requires an external MCU (microcontroller) to execute a Bluetooth ...

Read more...
4G serial routers
29 May 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
The 4G serial server devices HF2421 and HF2421G provide protocol conversion between RS-232/RS-485/RS-422 interfaces and Ethernet/Wi-Fi and 3G/4G, which can meet the solution requirements for serial/network ...

Read more...
WLAN MIMO antenna with four ports
29 May 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
The FXP.524 Venti antenna is a 4-in-1 MIMO, flexible PCB monopole type antenna. Made by Taoglas, the antenna has excellent efficiency and isolation performance for dual-band Wi-Fi applications. It has ...

Read more...
Out-of-the-box spoofing mitigation with Galileo’s OS-NMA service
29 May 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
Over the past two decades, satellite-based positioning has become an indispensable, everyday technology that we constantly rely on – often even without being aware of it. With the relentless expansion ...

Read more...
Drive testing of 2G, 3G, 4G and 5G NR mobile networks
29 May 2020, Coral-i Solutions , Telecoms, Datacoms, Wireless, IoT
Nemo Outdoor is a laptop-based drive test tool for 2G, 3G, 4G and 5G NR mobile network testing which supports over 300 devices and scanning receivers, from various vendors, all the latest network technologies ...

Read more...