Telecoms, Datacoms, Wireless, IoT


Fault-protected RS485 transceivers

18 February 2009 Telecoms, Datacoms, Wireless, IoT

Texas Instruments has introduced a family of ±70 V, fault protected RS485 transceivers that achieve over-voltage protection with no external termination needed. The SN65HVD17xx family is designed to survive over-voltage faults, such as direct shorts to power supplies, wiring faults, connector failures, cable crushes and tool misapplications. The widest common mode, from -20 to -25 V, allows for operation in harsh environments with large ground differences. These transceivers are offered in either a SOIC or DIP package and operate at a variety of speed grades such as 128 Kbps, 1 Mbps and 10 Mbps. The SN65HVD1780/1/2 operate over a wide voltage range from 3 V to 5 V, enabling applications that have fluctuating power sources. The SN65HVD1794 has a cable invert pin, which allows for simple correction of incorrectly configured bus wires.

EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Scalable and secure IoT device onboarding and management
Telecoms, Datacoms, Wireless, IoT
EasyPass is an enhancement within Cambium’s cnMaestro platform, aimed at providing local businesses with secure, efficient, and scalable device management making it ideal for high-demand environments such as educational institutions, retail spaces, and corporate campuses.

Read more...
Industrial-grade Ethernet switches
Vepac Electronics Telecoms, Datacoms, Wireless, IoT
Covering PoE-powered series and certified models like PROFINET, DNV, and Railway, these products offer reliable networking solutions for diverse industrial applications.

Read more...
Non-reflective SPDT RF switch
RS South Africa Telecoms, Datacoms, Wireless, IoT
The ADRF5019 from Analog Devices is a non-reflective, single pole, double throw RF switch that operates from 100 MHz to 13 GHz.

Read more...
Ultrawideband Low Noise Amplifier
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The ADL8101 is an ultrawideband, low noise amplifier that operates from 10 kHz to 22 GHz with typical gain and noise figure of 14 dB and 3,5 dB respectively.

Read more...
Data Centre trends 2025
Telecoms, Datacoms, Wireless, IoT
Innovation in powering and cooling AI racks, management of energy consumption and emissions all to be a focus in 2025.

Read more...
Air temperature and humidity transmitter
Mimic Components Telecoms, Datacoms, Wireless, IoT
The RHT air temperature and humidity transmitter is a fully wireless solution designed for seamless measurement of temperature and humidity over long distances.

Read more...
Module combines 5G and NTN support
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions announced the launch of its BG770A-SN ultra-compact 5G-ready satellite communication module, compliant with 3GPP releases 13, 14 and 17.

Read more...
SIMCom’s A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom’s A7673X series is a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...
Powering the intelligent edge
EBV Electrolink AI & ML
STMicroelectronics released new devices from the second generation of its industrial MPUs, the STM32MP2 series, to drive future progress in smart factories, smart healthcare, smart buildings, and smart infrastructure.

Read more...
Non-terrestrial network module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Fibocom unveiled its MA510-GL (NTN), a non-terrestrial networks module which is compliant with 3GPP Release 17 standard.

Read more...