New from austriamicrosystems is the AS1344 high-voltage DC-DC boost converter optimised for biasing photodiodes, LCD or PMOLED displays powered by single cell batteries.
At 15 V output voltage, the AS1344 delivers 120 mA from a 3 V or 28 mA from a 1,5 V input voltage. The IC operates from a single 0,9 to 3,6 V supply and provides adjustable output voltages in the range of 5,5 to 42 V. Its 1 MHz fixed switching frequency minimises the PCB footprint by allowing the use of tiny, low profile inductors and capacitors. This constant frequency switching also results in low, predictable output noise that can be easily filtered.
The device offers an automatic power save operation which improves efficiency at light loads, and its design reduces the operating supply current to only 22 μA. It offers both a 1 μA shutdown mode and an output disconnect feature. An adjustable soft-start feature enables powering up of applications even with drained batteries by limiting the input current during startup. The AS1344 offers 2% output voltage accuracy and a power-ok feature indicates when voltage is within 10% of regulation.
Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...240 W in compact form factor Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...Reliable isolation for modern networks ASIC Design Services
Computer/Embedded Technology
The Pro-Tek5 PTI Series delivers reinforced 5 kV Ethernet isolation for applications that demand robust protection, reliable signal integrity, and full IEEE802.3 performance.
Read more...You cannot manage what you cannot measure
Power Electronics / Power Management
South African sites are generating solar energy. Most still have no idea what is consuming it… or when, or why. Intelligent load management hardware is changing that.
Read more...Scalable and intelligent power solution
Power Electronics / Power Management
Designed for Africa’s rapidly evolving energy landscape, Bluetti’s ES125 offers a scalable, intelligent power solution that delivers reliable and cost-efficient electricity for uninterrupted operations.
Read more...Simulating grid abnormalities Conical Technologies
Power Electronics / Power Management
Simulating grid abnormalities has become an essential part of validating systems such as inverters, UPS units, photovoltaic inverters, and EV charging infrastructure.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version