|
|
|
ZigBee development kits
20 January 2010, Telecoms, Datacoms, Wireless, IoT
Ember has developed new EM35x InSight development kits for development and debugging of ZigBee products on the EM351 and EM357 ARM Cortex-M3 based systems-on-chip (SoCs) in the recently launched EM300 series semiconductor platform.
The kits include hardware, network development and debugging software, compiler and EmberZNet PRO networking stack for embedded applications. The hardware package consists of three EM35x InSight adapters (ISA3s) for programming and debugging ZigBee applications; three breakout boards with EM357-based modules; module variety pack with six modules – EM351 and EM357 variants – that can be connected to the breakout board; sample pack with 10 EM357 chips for customer designs; and power-over-Ethernet (PoE) switch and cables for network scale testing.
The EM35x InSight development kits contain Ember’s InSight Development Environment, which provides a suite of software tools for developing and debugging ZigBee PRO applications including smart energy and home automation. The IDE includes support for IAR’s EWARM IDE, thanks to which Ember’s InSight AppBuilder supports the generation of project files to work with IAR Embedded Workbench for ARM v5.40. This feature also allows developers to build ZigBee certifiable projects that can be directly read and built by IAR EWARM v5.40. For more information contact Christo Keyser, CST Electronics, +27 (0)11 608 0070, sales@cstelectronics.co.za, www.cstelectronics.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Bluetooth LE pass-through module
26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
The HM-BT4501 from HopeRF is a wireless data pass-through module based on a CMT4501 low-power Bluetooth 5.0 chip. By connecting with a microcontroller, it can be used to realise a connection and data ...
- Positioning module for autonomous driving
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The ZED-F9K from u-blox is a high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
- Automotive smart hub ICs
26 June 2019, Avnet South Africa, Telecoms, Datacoms, Wireless, IoT
Microchip Technology has added new single-port USB smart hub ICs to its family of USB automotive products. The USB4912 and the USB4712 can be used to add a single port under the radio, in the centre console ...
- Wideband amplifier for instrumentation
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions announced a new wideband distributed amplifier with the introduction of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
- Positioning and cellular antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Tycho MA310 antenna is a combination, small form factor GPS/GLONASS and penta-band cellular (GSM/GPRS/CDMA/ PCS/DCS/ WCDMA/UMTS) antenna to simplify AVL or fleet management antenna systems worldwide.
Made ...
- RF power doubler
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The QPA3357 from Qorvo is a power doubler that operates from 47 to 1218 MHz. It provides an output power of 57 dBm, a gain of 28 dB, and has a noise figure of 4,5 dB. This power doubler is matched to ...
- Ka-band power amplifier
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions’ new MAAP-011250 is a balanced 4 W power amplifier (PA) operating from 27,5 – 30 GHz, making it well suited for SATCOM and VSAT applications.
With the addition of this new ...
- Flexible wideband antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Taoglas FXUB64.18.0150C flexible wideband antenna has been designed to cover all working frequencies in the 600-3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM, NB-IoT, CAT-M1 and A-GPS ...
- High-frequency power dividers
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Pasternack has launched a new series of high-frequency power dividers targeted at 5G cellular communication, automotive radar and satellite communication applications.
The lineup consists of 17 new ...
- Cellular module for LPWA applications
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
u-blox has announced the SARA R5 series of LTE M and NB-IoT modules for low power wide area (LPWA) IoT applications. The module, built on the UBX R5 cellular chipset and the M8 GNSS receiver chip, is ...
- Hinged 4G LTE antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The hinged Apex II TG.35 wideband dipole antenna from Taoglas has been designed to cover all cellular, ISM and Wi-Fi working frequencies in the 600-6000 MHz spectrum. It has been primarily designed for ...
- Dual-band GNSS module
26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
The Quectel LC79D is a compact dual-band GNSS module with support for L1 and L5 bands for satellites to improve positioning accuracy.
Featuring concurrent multi-constellation GNSS receivers on dual ...
|
|
