mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

USB to serial converters
20 January 2010, Telecoms, Datacoms, Wireless, IoT

Advantech has introduced the USB-4604B and USB-4604BM, USB to 4-port RS232 and USB to 4-port RS232/422/485 converters.

Both models offer plug-and-play serial connectivity for USB equipped PCs and systems, and since they are USB-powered, there is no need for additional power supplies.

The devices are both fully USB v1.1 and v2.0 compliant and feature serial communication rates of up to 921,6 Kbps. The USB-4604BM provides software selectable RS232/422/485 settings for each port and automatic RS485 send data control. Both models include 16 kV electrostatic discharge (ESD) protection and utilise standard DB9 male connectors, so that common PC cables can be used without additional adapters.

To ensure a reliable USB connection, a type-B USB connector with thumbscrews makes sure that the cable stays connected despite vibration or inadvertent tugging on the cable. For convenience, a USB cable with locking connector is included with each unit. Packaged in rugged ABS plastic, the USB-4604B and USB-4604BM are ready for DIN-rail or direct panel/wall mounting. Drivers are included for Windows 2000/2003/XP and CE 5.0.


Credit(s)
Supplied By: ProMicro
Tel: +27 11 706 7913
Fax: 086 671 6808
Email: info@promicro.co.za
www: www.promicro.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Flexible wall-mount whip antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The Cyclops WM.95 from Taoglas is a high-efficiency (over 50%) 915 MHz flexible whip antenna with a screw-mounted wall-mount L bracket. The radiation pattern is omnidirectional in the azimuth, allowing ...
  • Bluetooth LE pass-through module
    26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
    The HM-BT4501 from HopeRF is a wireless data pass-through module based on a CMT4501 low-power Bluetooth 5.0 chip. By connecting with a microcontroller, it can be used to realise a connection and data ...
  • Positioning module for autonomous driving
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The ZED-F9K from u-blox is a high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
  • Automotive smart hub ICs
    26 June 2019, Avnet South Africa, Telecoms, Datacoms, Wireless, IoT
    Microchip Technology has added new single-port USB smart hub ICs to its family of USB automotive products. The USB4912 and the USB4712 can be used to add a single port under the radio, in the centre console ...
  • Wideband amplifier for instrumentation
    26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
    MACOM Technology Solutions announced a new wideband distributed amplifier with the introduction of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
  • Positioning and cellular antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The Tycho MA310 antenna is a combination, small form factor GPS/GLONASS and penta-band cellular (GSM/GPRS/CDMA/ PCS/DCS/ WCDMA/UMTS) antenna to simplify AVL or fleet management antenna systems worldwide. Made ...
  • RF power doubler
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The QPA3357 from Qorvo is a power doubler that operates from 47 to 1218 MHz. It provides an output power of 57 dBm, a gain of 28 dB, and has a noise figure of 4,5 dB. This power doubler is matched to ...
  • Ka-band power amplifier
    26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
    MACOM Technology Solutions’ new MAAP-011250 is a balanced 4 W power amplifier (PA) operating from 27,5 – 30 GHz, making it well suited for SATCOM and VSAT applications. With the addition of this new ...
  • Flexible wideband antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The Taoglas FXUB64.18.0150C flexible wideband antenna has been designed to cover all working frequencies in the 600-3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM, NB-IoT, CAT-M1 and A-GPS ...
  • High-frequency power dividers
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    Pasternack has launched a new series of high-frequency power dividers targeted at 5G cellular communication, automotive radar and satellite communication applications. The lineup consists of 17 new ...
  • Cellular module for LPWA applications
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    u-blox has announced the SARA R5 series of LTE M and NB-IoT modules for low power wide area (LPWA) IoT applications. The module, built on the UBX R5 cellular chipset and the M8 GNSS receiver chip, is ...
  • Hinged 4G LTE antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The hinged Apex II TG.35 wideband dipole antenna from Taoglas has been designed to cover all cellular, ISM and Wi-Fi working frequencies in the 600-6000 MHz spectrum. It has been primarily designed for ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.