10 GbE LAN magnetic modules
20 January 2010
Telecoms, Datacoms, Wireless, IoT
The S558-10GB-XX series of 10GBASE-T LAN magnetics modules from Bel Fuse is designed to address the transmission standards of 10 GbE data over copper LANs. Meeting the IEEE 802.3an requirements for operation over 100 metres on CAT6A/CAT7 cabling, the series is qualified with leading IC manufacturers’ 10GBASE-T transceivers.
The new single-port, SMT LAN magnetics modules are suitable for use with 1:1 turns ratio 10GBASE-T PHY chips. The new parts boast good insertion loss, return loss and crosstalk performance to support networks’ optimal performance and reliability. Electrical specifications include an isolation voltage of 1500 Vrms and variable minimum primary inductance as dictated by PHY requirements. Operating temperature range is 0°C to 70°C. Additionally, the 24-pin, low-profile modules feature a 15 mm (L) X 12 mm (W) X 7,4 mm (H) footprint. The RoHS-compliant parts are compatible with reflow processes up to 245°C peak.
For more information contact Lambert Colyn, CST Electronics, +27 (0)11 608 0070, sales@cstelectronics.co.za, www.cstelectronics.co.za
Further reading:
Macom targets broadband radar with time delay MMIC
RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
Macom’s MADU FR1012 is a GaAs MMIC 1-bit true time delay device covering 4 GHz to 12 GHz, designed for broadband microwave systems where beam accuracy and signal integrity are critical.
Read more...
Compact analogue phase shifter
RF Design
Telecoms, Datacoms, Wireless, IoT
The Mini-Circuits JSPHS-150+ is a compact analogue voltage-controlled phase shifter designed for narrowband RF applications between 100 and 150 MHz.
Read more...
Wireless connectivity expanded
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.
Read more...
Integrated X-band radar front-end module
RF Design
Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.
Read more...
Introducing Aurata
CST Electronics
Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.
Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.
Read more...
Quectel expands 5G portfolio
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.
Read more...
Compact RTK design: More than just the receiver
iCorp Technologies
Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.
Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services
Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.
Read more...
Channel emulator for 6 G and Wi-Fi 7/8
Concilium Technologies
Telecoms, Datacoms, Wireless, IoT
With 400 MHz instantaneous bandwidth and support for carrier frequencies up to 23,6 GHz, Vertex 6.0 is the industry’s first channel emulator designed for next generation 6 G and Wi-Fi 7/8 testing.
Read more...
printer friendly version