|
|
802.15.4/ZigBee modules
28 April 2010, Telecoms, Datacoms, Wireless, IoT
California Eastern Laboratories’ MeshConnect modules deliver advanced 802.15.4/ZigBee performance and a rich set of features, at a cost-effective price point. They are based on CEL’s MeshConnect ZIC2410, an integrated IC platform that combines a powerful RF transceiver with a baseband modem, hardware MAC and 8051-based 8-bit microprocessor.
With scalable data rates from 250 Kbps to 1 Mbps, MeshConnect modules can meet the needs of simple 802.15.4 networks as well as applications that demand higher bandwidth or ‘burst’ capability. In addition, they feature a unique, on-chip audio codec that enables low-cost voice transmission applications like wireless intercoms and walkie-talkies. The MeshConnect module’s +6 dBm output power provides good range, reliable transmission and enables fewer nodes in a network. It also makes these modules well suited for applications where cost and power constraints do not allow for external power amplifiers or peripheral range extension components.
The modules support ZigBee certified stacks, so they will run ZigBee mesh network applications and interface with other ZigBee components. CEL provides a variety of software tools designed to speed time-to-market using these ZigBee-related applications. The company also provides support for third party mesh stacks, enabling designers to choose other software implementations that may better meet their needs.
CEL’s MeshConnect modules are FCC, IC and CE certified. For more information contact Andrew Hutton, RF Design, +27 (0)21 555 8400, sales@rfdesign.co.za, www.rfdesign.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Waveguide to coax adaptors
31 July 2019, RF Design, Interconnection
Pasternack has launched a new series of waveguide to coax adapters for use in 5G, telecommunications, automotive radar, satellite communications, point-to-point radio, and terrestrial communications applications.
The ...
- Low phase-noise amplifier
31 July 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
Available in 2,8 x 1,73 x 0,1 mm bare-die and 5 x 5 mm, 32-lead AQFN packaged formats, MACOM Technology Solutions’ MAAL-011151 is well suited for use as a low phase-noise amplifier stage for signal generation ...
- Wideband digital attenuator
31 July 2019, Telecoms, Datacoms, Wireless, IoT
The CMD280 from Custom MMIC is a wideband 5-bit digital attenuator that operates from DC to 30 GHz (covering the L, S, C, X, Ku, K and Ka bands). Each bit of this GaAs MMIC attenuator is controlled by ...
- Double-balanced X-band mixer
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The MM1-0832LSM is a double-balanced mixer from Marki Microwave with an RF/LO frequency from 8 to 32 GHz and an IF frequency from DC to 12 GHz. This high-frequency X-band GaAs MMIC mixer works well as ...
- Low-noise RF amplifier
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The CMD299 from Custom MMIC is a wideband GaAs MMIC low-noise amplifier that operates from 18 to 40 GHz. It provides an output power of up to 7,5 dBm (0,0056 W), a gain of 16 dB, and has a noise figure ...
- Wideband amp for instrumentation and communications
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions has rolled out a new wideband distributed amplifier in the form of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
- Wideband LTE antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Taoglas announced an addition to its successful Warrior series: the PA740.A antenna. With additional LTE bandwidth and new bands added for 5G functionality, the new antenna is an evolved design from the ...
- Mini programmable IoT module
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The EM510 is an ultra-compact Tibbo BASIC/C-programmable IoT module with a single UART, Ethernet, and optional Wi-Fi/BLE (Bluetooth Low Energy) connectivity. The module offers substantial performance ...
- Low-power IoT module in volume production
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Nordic Semiconductor’s nRF9160 system-in-package (SiP) – an LTE-M/NB-IoT and GPS cellular IoT module – has entered the final volume silicon production phase, having successfully passed a series of major ...
- Laminates for 5G active antenna arrays
31 July 2019, RF Design, Manufacturing / Production Technology, Hardware & Services
Rogers Corporation has introduced UL 94 V-0 antenna-grade laminates manufactured with standard profile electro-deposited copper foil to meet present and future performance requirements in active antenna ...
- External antenna for 868/915 MHz bands
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Shockwave TLS.90.205111 is a mechanically robust, waterproof, external antenna operating at 868 MHz and 915 MHz with 2 metres of low-loss TGC-200 cable and an SMA(M) connector. Manufactured by Taoglas, ...
- Double-balanced RF mixer
31 July 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
The MAMX-011035 from MACOM Technology Solutions is a GaAs double-balanced passive diode mixer housed in a lead-free 3 mm, 12-lead QFN package. The mixer offers low conversion loss, high linearity and ...
|
|
