New from Semtech is the SX1233, a programmable ISM-band transceiver that combines a bit rate of 600 Kbps with a link budget of 137 dB. It offers high receive (Rx) sensitivity to enhance reception of weaker signals, as well as a high transmitter (Tx) output power programmable in 1 dB steps. Strong blocking immunity of 80 dB and high linearity give the transceiver front-end protection from both in-band and out-of-band interference (including cellular and devices sharing the 2,4 GHz band), enabling the device to meet stringent Rx robustness requirements. The zero-IF architecture of the SX1233 uses a smart AFC (automatic frequency control) engine to ensure optimum performance for low modulation index signals without susceptibility to undesirable image and half-IF spurious products. TrueRF technology eliminates the need for a SAW filter, enabling a low-cost external component count while still satisfying ETSI and FCC regulations. The SX1233 also integrates the VCO tank, PLL loop filter and an RF switch.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...18 W monolithic microwave amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
printer friendly version